TANGO27/2.5M/SMAM/S/S/17

VSWR:	2.1
Applications:	GPRS, GSM
Height (Max):	0.591" (15.00mm)
Mounting Type:	Panel Mount
Ingress Protection:	IP67
Termination:	Connector, SMA Male
Features:	--
Gain:	2.16dBi
Return Loss:	--
Series:	TANGO 27
Number of Bands:	5
Antenna Type:	Puck
Frequency Range:	--
Frequency (Center/Band):	850MHz, 900MHz, 1.8GHz, 1.9GHz, 2.1GHz
Frequency Group:	UHF (300 MHz ~ 1 GHz), UHF (1 GHz ~ 2 GHz)
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The TANGO27/2.5M/SMAM/S/S/17 is an important and versatile type of RF antenna, which finds application in a wide range of industries. This article will discuss the applications and working principles of the TANGO27/2.5M/SMAM/S/S/17, located in the RF antennas category.

Structure and Design

The TANGO27/2.5M/SMAM/S/S/17 is a medium sized, low cost RF antenna that features a highly integrated design. It includes a horizontally polarized, 2.5m long dipole antenna with a 17 degree downtilt capability, making it ideal for fixed point measurements and long-range applications. The unit also features a Frequency Range of 27 MHz to 2.5 GHz, a Gain of 17 dB, and a VSWR of 2.5:1. The unit’s integrated design allows for easy installation and setup.

Applications

The TANGO27/2.5M/SMAM/S/S/17 is designed for installation in outdoor locations, such as on buildings, antenna towers, poles, and other structures. It can be used for long-range wireless communications systems, base stations, radio networks, and cellular phone towers. It can also be used to measure the signal strength in an area, and for point-to-point applications such as data transfer, mobile communications, and digital television.

Working Principle

The TANGO27/2.5M/SMAM/S/S/17 operates using the same principles as any other dipole antenna. When a signal is applied to it, the antenna converts it into a radio wave that propagates outwards in all directions. The antenna’s design also acts to amplify the received signal, which helps to extend its range and improve the quality of the signal. The antenna is also designed to be able to adjust the angle at which it sends out radio waves, allowing it to be pointed in specific directions to better pick up signals.

Impedance Matching

In addition to its basic antenna design, the TANGO27/2.5M/SMAM/S/S/17 is also designed for impedance matching. This means that the impedance of the antenna can be adjusted for optimum performance and to match the impedance of the system that it is connected to. This helps to ensure that the antenna is sending out and receiving the strongest signal possible.

Conclusion

The TANGO27/2.5M/SMAM/S/S/17 is an important type of RF antenna, which is used for applications across a wide range of industries. It offers a highly integrated design, allowing for easy installation and setup, and includes adjustable downtilt and frequency range capabilities. Its impedance matching design further ensures that it will be able to send and receive the strongest signal possible.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description