TAP225K035DTS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors are widely used in various applications due to their advantages such as high capacity, small size, low internal resistance and long service life. The JKCET TAP225K035DTS is one of the most popular types of tantalum capacitors for various electrical and electronic applications.

The TAP225K035DTS is an ultra-miniaturized, high performance, EMI filter grade, radial, snap-in, tantalum capacitor. It has a capacitance of 25µF and a rated voltage of 10V, and is available in a range of termination styles. The component is characterized by its very small size, with a diameter of 2.5mm and body length of 3.3mm, and is designed for use in high temperature applications up to 105°C.

The main advantage of the TAP225K035DTS is its extremely low Equivalent Series Resistance (ESR), allowing for ultra-low equivalent circuit losses and low self-heating for higher rated currents. The component is a wet-slug construction with a segmented manganese dioxide dielectric, and a 50%-tantalum powder cathode.

The TAP225K035DTS component is mainly used in power circuits of transceivers and computers, such as DC-DC converters, signal line harmonic filter circuits, and shunt-mode filter circuit. In these applications, the component provides EMI filter solutions by suppressing high frequency components while keeping the signal line in a low-impedance environment. Additionally, the capacitors are used with precharge and discharge circuits in portable and battery powered systems, helping to reduce the input inrush current and improve performance.

The working principle of the TAP225K035DTS module is based on the basic principles of a capacitor, which is to store electrical energy in a form of an electrostatic field. When energy is applied to a capacitor, electric charges of equal magnitude but opposite polarity accumulate on its two plates, which creates a difference in electrical potential between them. The electric field created by this potential difference across the plates enables the capacitor to store energy and act as a filter.

The EMI filter grade TAP225K035DTS component has a characteristic impedance (CR) of about 800 ohms, providing an optimal balance between capacitance and impedance. The component is designed to reduce noise and interference on active signal lines and protect against overvoltage. It also provides load regulation, to smooth the output of DC-DC converters, and acts as a capacitor to filter out RF disturbance.

In conclusion, the JKCET TAP225K035DTS is a high performance, EMI filter grade, tantalum capacitor. It is a suitable choice for filtering out noise on signal lines, protecting against overvoltage, and providing load regulation. It is an ideal choice for electrical and electronic applications, where a compact size and a high capacitance-to-size ratio are desired.

The specific data is subject to PDF, and the above content is for reference