TAP476M006SRW

Operating Temperature:	-55°C ~ 125°C
Failure Rate:	--
Features:	General Purpose
Manufacturer Size Code:	F
Lead Spacing:	0.098" (2.50mm)
Height - Seated (Max):	0.394" (10.00mm)
Size / Dimension:	0.236" Dia (6.00mm)
Package / Case:	Radial
Mounting Type:	Through Hole
Lifetime @ Temp.:	1000 Hrs @ 85°C
Series:	TAP
ESR (Equivalent Series Resistance):	2 Ohm
Type:	Conformal Coated
Voltage - Rated:	6.3V
Tolerance:	±20%
Capacitance:	47µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Tantalum Capacitors

Tantalum capacitors, also known as Ta-caps, are an essential passive component in electronic systems. These electronic components are made from tantalum, a metallic element found within the fifth group of the periodic table, and are available in two varieties — solid and wet. Made of a tantalum anode, an electrolytic or tantalum oxide dielectric, and a thin-foil cathode, these capacitors offer a range of capabilities and benefits that must be considered when assembling or designing any electronic system.

TAP476M006SRW Features

TAP476M006SRW is a type of tantalum capacitor produced by TDK Corporation. It has a maximum capacitance of 22µF and a voltage rating of 6.3V. The product has an excellent frequency response, high capacitance stability, and good temperature characteristics. Its dimensions are 4.7mm by 6.0mm, with a 0.5mm height. For prolonged use, the TAP476M006SRW can be soldered with reflow or hot-air oven process.

TAP476M006SRW Application Field

The TAP476M006SRW tantalum capacitor is mainly used in power conversion systems, power supplies, telecom, and consumer applications. This product is somewhat versatile and can be used in high-density circuit boards. It is also reportedly used in applications such as data logging, motor control, and digital signal processing.

TAP476M006SRW Working Principle

TAP476M006SRW tantalum capacitors are a type of electrolytic capacitor that uses the tantalum anode and electrolytic dielectric for its operation. In order for the capacitor to work, an anode is placed in the middle of an electrolyte or acid solution. The voltage flow through the anode causes a thin layer of tantalum oxide to form in between the anode and the electrolyte/cathode. This electrically insulating layer of tantalum oxide serves as the dielectric and is responsible for the capacitance of the TAP476M006SRW.The capacitance of the TAP476M006SRW is determined by the thickness of the dielectric layer as well as the surface area of the anode. The anode and the cathode act as plates that accumulate a charge when a potential difference is applied across them. This capacitance increases as the charge accumulates, and the voltage across the capacitor can only be increased to a certain point before the dielectric breaks down, resulting in a short circuit.

Benefits of TAP476M006SRW

TDK Corporation’s TAP476M006SRW tantalum capacitors offer several advantages when compared to other types of passive components. Since it has a small size, it can easily provide higher capacitance values making it ideal for high-density circuit boards. Another benefit of using TAP476M006SRW is its high temperature performance. It has a greater ripple current rating and is especially suitable for high temperature applications. In addition, the product has a long lifespan, providing up to 1000 hours of operation with stable performance. Finally, TAP476M006SRW has an excellent frequency response. This type of capacitor has a capacitance variation of 5% or less at 1kHz, making it ideal for applications requiring high frequencies.

Conclusion

TAP476M006SRW tantalum capacitors by TDK Corporation offer numerous advantages over other types of passive electronic components. While this type of capacitor has a small size, it contains a greater amount of capacitance which makes it suitable for applications with high frequencies. Since it also has a greater ripple current rating, this product is well-suited for high-temperature applications, while providing up to 1000 hours of operation with good performance. All of these benefits make the TAP476M006SRW a reliable and efficient choice in many different types of electrical applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description