TBD62387APG,HZ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A surge of current or voltage through an electrical device is considered an interference in the current conduction path and can lead to system damage. To avoid this, an electro-mechanical device known as a power management integrated circuit (PMIC) is used to limit or regulate the flow of power within an electronic system. One type of PMIC, called power distribution switches, load drivers, and solid state switching devices, are commonly used to switch loads and control the flow of power between various components. This article will focus primarily on the TBD62387APG-HZ device, a power distribution switches, load drivers and solid state switching devices.

The TBD62387APG-HZ device is designed to provide high current switching and load driving performance at very high temperatures. The device can function at a maximum power of 650 volts and 12 amps. It is designed to switch a typical load between 0 and 3 amps. Its maximum switching rate is 50 MHz, and it can be used in both continuous and transient mode operation. Its under-voltage lockout prevents operation below a predetermined voltage, while its over-temperature lockout prevents operation at temperatures above 100 degrees Centigrade.

The TBD62387APG-HZ is a dual channel device, allowing for independent switching and load driving of two separate output terminals, such as positive and negative logic signals. It also has an internal charge pump, allowing it to drive high capacitive loads. It has open drain outputs, allowing it to be used in various types of circuits, such as three-state logic, level shifting, and clamping.

The TBD62387APG-HZ can operate in either an open-drain mode, with a logic output referred to a ground, or as a logic output with a supply voltage applied. Its logic I/O pins can be used to connect the device to a control system, enabling the user to control the device\'s output. It also has a built-in oscillator that can be programmed to adjust the frequency of its output pulse.

In addition to its ability to provide power distribution and load driving, the TBD62387APG-HZ serves as a voltage regulator. Its built-in voltage regulator regulates the output voltage by sensing the output current and maintains the output voltage at an adjustable level. Furthermore, this device also has a built-in battery backup function, providing a regulated output voltage even when the primary power source is cut off. Finally, its I/O pins can be used to sense the incoming voltage, allowing the user to be alerted when the voltage exceeds or falls below a pre-specified threshold.

The TBD62387APG-HZ is well suited for applications where a high-temperature operation and a high power handling capability are required. It is commonly used in automotive and medical device applications, such as battery control, motor control, and power level control. It is also commonly used in consumer electronics, such as high-end video and audio equipment. Additionally, the device can be useful for industrial applications, such as power distribution systems. The TBD62387APG-HZ offers a high-performance solution for power management applications and can provide reliable operation in extreme temperatures.

The specific data is subject to PDF, and the above content is for reference