TBF-1608-245-R1N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EMI/RFI Filters (LC, RC Networks) are important components in electronic equipment used in nearly every industry sector from consumer products to enterprise applications. These filters are used to reduce EMI/RFI noise that is generated by both electronic and non-electronic devices. The specific type of filter needed depends on the noise levels, frequencies, and resonance characteristics of the source device or environment. One of the more popular varieties of EMI/RFI filters is the TBF-1608-245-R1N.

The TBF-1608-245-R1N is a small, surface-mountable filter designed for use in a wide range of applications. As a 3-Pole Common Mode (CM) EMI/RFI filter, it is designed to reduce both common-mode and differential-mode noise. The filter consists of a plastic element with three (3) capacitors and one (1) inductor connected in series. The total impedance of the filter is approximately 8 ohms at 200kHz on a 50 ohm transmission line.

The TBF-1608-245-R1N is designed for use in a broad range of applications, including differential-mode and common-mode noise reduction. It can be used in automotive environments, communication systems, digital systems, power supplies, as well as in other types of noise-suppression applications. In automotive applications, it is used to reduce the noise generated by various electronic and non-electronic components in the vehicle.

In terms of working principle, the TBF-1608-245-R1N filter is designed to reduce both common-mode and differential-mode noise. The filter consists of a plastic element with three (3) capacitors and one (1) inductor connected in series. The capacitors provide common-mode noise attenuation while the inductor provides differential-mode noise attenuation. The filter is designed to reduce the noise by providing an impedance mismatch that causes stray noise to be reflected back into the source. This reduces the amount of noise reaching the receiver, and hence reduces the amount of interference.

The TBF-1608-245-R1N filter is also designed to withstand high temperatures, shock, and vibration. It is made from a rugged plastic material that is highly resistant to corrosion, and it has an operating temperature range of -20°C to +85°C. The filter also has a wide bandwidth, with a signal frequency range of 8MHz to 6GHz.

In conclusion, the TBF-1608-245-R1N is a popular 3-Pole Common Mode (CM) EMI/RFI filter designed for use in a wide range of applications. It is designed to reduce both common-mode and differential-mode noise, and is highly resistant to shocks, vibrations, and temperatures. The filter is made from a rugged plastic material that is highly resistant to corrosion, and it has an operating temperature range of -20°C to +85°C. The filter also has a wide bandwidth, with a signal frequency range of 8MHz to 6GHz. As such, it is a highly effective and reliable filter for a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference