TBS22M-TP

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Type:	Single Phase
Technology:	Standard
Voltage - Peak Reverse (Max):	1kV
Current - Average Rectified (Io):	2.2A
Voltage - Forward (Vf) (Max) @ If:	1.1V @ 2A
Current - Reverse Leakage @ Vr:	5µA @ 1000V
Operating Temperature:	-55°C ~ 150°C (TJ)
Mounting Type:	Surface Mount
Package / Case:	4-SMD, Flat Leads
Supplier Device Package:	4-TBS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Bridge Rectifiers

Bridge rectifiers are some of the most common types of rectifiers used in power supply systems. They are used to convert AC power to DC power. As the name implies, they are formed with four diodes arranged in a bridge configuration. The TBS22M-TP is a particularly popular bridge rectifier, and it is used for a variety of applications.The TBS22M-TP bridge rectifier contains four diodes connected in a bridge rectifier circuit. The bridge rectifier can be compared to an electronic version of a single-phase diode rectifier. The diodes in the bridge rectifier circuit are controlled so as to turn on and off alternately, with each diode conducting when the voltage across it is positive with respect to its anode. When the voltage across two of the diodes is in opposite directions at the same time, then the circuit will conduct, providing more power and better efficiency than a standard single-phase rectifier. This is due to the fact that the diodes can be connected in series or parallel to provide a greater number of effective paths for the current.The TBS22M-TP bridge rectifier is designed to operate at up to 600V and has a surge rating of 400A and a maximum continuous current of 22A. It can be used in applications requiring high input voltage and high current, such as motor drive or welding systems. It is also useful in power supplies and switching power supplies, and it can be used as a bridge rectifier in DC to DC converters.The bridge rectifier is typically used in full-wave rectification circuits, but it can also be used in half-wave rectifier circuits in some applications. In full-wave rectifier circuits, both positive and negative cycles of the AC input voltage are applied simultaneously to the two ends of the bridge rectifier, providing two distinct peaks for each half-cycle. This allows for more power to be obtained from the input voltage, since both half-cycles are used.In half-wave rectifier circuits, only one side of the AC voltage is used, and the other side is not applied. This will provide a single peak per half-cycle, which limits the amount of power that can be drawn from the input voltage. However, this type of rectifier is sometimes used in applications that require the processing of signals or the regulation of voltage, since the half-wave rectifier will provide fewer peaks than the full-wave rectifier.In either type of circuit, the TBS22M-TP bridge rectifier can be used to convert AC power to DC power with a high level of efficiency. The rectifier will also limit the amount of ripple in the output voltage, ensuring smooth operation of the systems and reducing the need for additional filtering. The bridge rectifier is easy to install and can be used in a variety of different circuits or systems.The TBS22M-TP bridge rectifier is an effective and efficient device, and it is popular in many different power supply applications. With its high input voltage, surge rating, and current capacity, it is well-suited for motor drives, welding systems, DC to DC converters, and power supplies. It is also useful in half-wave or full-wave rectifier circuits, allowing it to be used in a variety of different power systems or signal processing applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description