TC164-FR-073K92L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor networks and arrays are particularly important components in a wide variety of electronic applications. One particular example of an often utilised network is the TC164-FR-073K92L. This type of network generally consists of nine resistors, with 5 terminals. Usages of this network will be explored further, as well as delving deeper into the working principle of the component.

The most common application for the TC164-FR-073K92L is for filter networks. Usually, filter networks are used to remove unwanted part of a signal in a given range. The TC164-FR-073K92L is particularly popular due to its ability to create low-pass filters. This can be especially useful in audio applications, where a low-pass filter can reduce the level of higher frequencies. As a result, down-sampled audio can be produced without any noticeable detrimental effects to the sound quality. Also, this network lends itself well to production of high-pass filters, which are used to reduce lower frequency signals. This can then be advantageous in certain audio applications, as it allows finer control of the audio spectrum.

In terms of its working principle, the TC164-FR-073K92L consists of nine resistors which have their reltive values selected so that when R5 is used as a wiper on the W terminal, some spread of the resistances from the node of R1, R2 and R3 to VH is produced. This creates UH and VL. The total resistance of the network is given by the relationship:

R_Total = R1 + R2 + R4 + R5 + R6 + R7 + R8 + R9.

It is also important to note that the resistors have been carefully selected to also allow the creation of low pass filters, which is their most common application. If these resistors were to be replaced with different values, this would limit the efficiency of the low pass filter, as frequencies outside of the desired range would not be attenuated enough. Furthermore, it is also possible to use this array to produce high pass filters which have been tuned for specific applications such as audio.

An application where the TC164-FR-073K92L network is particularly well-suited is RF noise interference reduction. By carefully designing the filter to attenuate RF noise over a range, noise is eliminated while the signal retains its integrity. Many devices have been designed using this network to reduce unwanted signal interference, while allowing for a high degree of customisation and fine tuning.

Indeed, there is a myriad of different electronic applications where the TC164-FR-073K92L filter can be used to great effect. The component has a great range of customization options and can be used to create efficient low-pass and high-pass filters. Not only this, it can be used to reduce RF interference from signals, allowing sensitive equipment to operate at high performance. This is why the TC164-FR-073K92L is much used and trusted by designers all over the world.

The specific data is subject to PDF, and the above content is for reference