TCE0806S-500-2P-T200

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes are electrical components that are used to block the flow of alternating current (AC) over a current or high-frequency line while allowing direct current (DC) to pass. The most common application for this type of filter is in power supplies and high-density electronics, where there is a need to reduce or eliminate electromagnetic interference (EMI) and radio frequency interference (RFI). This type of filter is also frequently used in industrial applications, such as robotics, medical imaging, laser technology, and others.

TCE0806S-500-2P-T200 is one example of Common Mode Chokes. This type of filter is a two-pole filter, which means that it contains two poles: one for passing the direct current and one for blocking the alternating current. It has a maximum working voltage of 250V and a maximum power rating of 500mW. It has a wide range of operating frequency (100KHz to 500MHz) and a typical insertion loss of 25dB. In addition, the choking impedance is between 30 to 70Ohms, making it suitable for applications requiring high impedance.

The TCE0806S-500-2P-T200 Common Mode Choke can be used in many applications, including high-frequency power supplies, telecommunications equipment, robots, medical imaging, laser technology, and more. It is specifically designed to reduce EMI/RFI, improve system performance, and enhance device reliability. In power supplies, the filter helps to reduce the amount of conducted and radiated emissions of the power supply by blocking out AC and other high frequency noise. In telecommunications applications, the filter helps to reduce the amount of interference on a transmission line, such as interference caused by nearby radio signal sources. For robots, the choke reduces the amount of noise and EMI on the robot’s communication line, which can cause the robot to malfunction or perform abnormally. In medical imaging and laser technology, the filter helps to reduce the amount of noise and EMI emitted from the devices.

The working principle of the TCE0806S-500-2P-T200 Common Mode Choke is based on the concept of impedance matching. The filter is designed to have high impedance on the DC line, which is capable of blocking any AC current while still allowing low frequency signals, such as the DC signals used in the applications mentioned above, to pass through. The filter also has an inductor attached to both the AC and DC lines, which helps to reduce the inductance in the circuit by providing a conductive path for the current to pass through. This inductor also helps to reduce the amount of capacitive loading on the line, which can cause undesired effects such as voltage overshoots.

In conclusion, the TCE0806S-500-2P-T200 Common Mode Choke is a two-pole filter designed to reduce EMI/RFI, improve system performance, and enhance device reliability. It is capable of handling a maximum working voltage of 250V and a maximum power rating of 500mW. It also has a wide operating frequency range of 100KHz to 500MHz and a typical insertion loss of 25dB. The choke is suitable for applications requiring high impedance and can be used in a variety of applications including power supplies, robots, telecommunications equipment, medical imaging, and laser technology.

The specific data is subject to PDF, and the above content is for reference