TCM2010-261-4P-T Filters

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes (CMCS) are electrical components used to reduce the level of high frequency noise in a circuit. They function by reducing the amount of high-frequency electrical signal that is present in the circuit, while still allowing lower-frequency signals to pass through unaltered. CMCS are widely used in a variety of applications, from consumer electronics to industrial and medical systems. The TCM2010-261-4P-T is one such CMCS, designed for suppression of high-frequency noise in High Speed Serial Data and Ethernet-based applications. This article will discuss the features and working principles of the TCM2010-261-4P-T.The TCM2010-261-4P-T is a low-profile, common-mode choke designed to reduce differential-mode and common-mode noise interference in high-speed serial data, Ethernet-based systems, and other Electronics applications. The TCM2010-261-4P-T utilizes a network of four coils and eight ferrite chips with an inductance value of 1.2uH and 1.5uH, respectively. The wide bandwidth range of the TCM2010-261-4P-T extending from 7MHz to 700MHz makes it ideal for applications such as USB3.0, eSATA, IEEE1394, USB2.0, and Gigabit Ethernet, and is also capable of suppressing high frequency noise generated by other Electronics components. The TCM2010-261-4P-T works on the principle of Electro-Magnetic Interference (EMI) reduction. EMI is a type of interference caused by the electrical and magnetic fields generated by electronic circuitry. When two conductors carrying current are placed in proximity to each other, an alternating current induced in one will cause an alternating current in the other. The resulting current flow back and forth between the conductors is known as a common-mode current.The TCM2010-261-4P-T works to reduce the amount of common-mode current present in a circuit by using the inductance of its four coils and eight ferrite chips to create a moderate resistive impedance in the circuit. This impedes the flow of a high frequency current while still allowing for the transmission of lower frequency signals. In effect, the TCM2010-261-4P-T acts as a “filter”, blocking out high-frequency noise while allowing lower-frequency signals and voltages to pass through unaltered.Additionally, the TCM2010-261-4P-T is capable of operating with a wide input voltage range from 10V to 26V and withstands up to 93% humidity. Its low profile and small size make it well-suited for a variety of Electronics systems, including Ethernet-based applications, as well as the elimination of interference caused by EMI in industrial systems and seismic detection systems.In conclusion, the TCM2010-261-4P-T is a low-profile, high-quality common-mode choke designed for reducing high-frequency noise in Serial Data and Ethernet-based applications. The TCM2010-261-4P-T utilizes a network of four coils and eight ferrite chips with an inductance value of 1.2uH and 1.5uH, respectively, to create a moderate resistive impedance in the circuit, impeding the flow of a high frequency current while still allowing for the transmission of lower frequency signals. Additionally, the TCM2010-261-4P-T is capable of operating with a wide input voltage range and withstands up to 93% humidity, making it suitable for a variety of Electronics systems and industrial applications.

The specific data is subject to PDF, and the above content is for reference