TDA7350

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TDA7350 is a high performance single channel integrated audio preamplifier custom designed for car-radio applications. It offers a variety of features that make it particularly suitable for use in car audio systems. It has a wide range of input levels and can be used with a number of different power supplies. It also has low distortion and good signal-to-noise ratio, making it suitable for use with low-power sources.

TDA7350 is designed to provide amplifier gain and voltage gain control of the audio signal. It also has a DC servo feed-forward loop which eliminates any AC coupling between the preamplifier output and the amplifier input. This loop helps to minimize distortion and improves overall sound quality.

The TDA7350 operates as a linear amplifier and can provide up to 25dB of gain. This gain can be adjusted using a pair of voltage-controlled pots, one for each of the amplifier’s input channels. The amplifier can drive both resistive and capacitive loads, which makes it suitable for applications that require both high and low impedance inputs. It also has a low-noise input stage, which can be used to improve the sound quality of low-end sources.

TDA7350 is a very versatile device. It has an integrated tone control circuit, which allows users to adjust the treble, bass and mid-range levels of the audio signal. This is especially useful in car audio systems, where users may want to tailor the sound of the system to the individual tastes of the driver. The device also has a number of pre-set frequencies that can be used to attenuate certain frequency ranges.

TDA7350’s working principle is based on the principle of linear amplification and involves the use of a pair of transistors to amplify sound signals. The transistors are connected to the input and output stages of the device. The input stage consists of an input bias circuit, which is used to convert the audio signals into a voltage. This voltage is then amplified by the transistors in the output stage and fed back to the input stage.

The amplifier gain of the TDA7350 is controlled by the two voltage-controlled pots mentioned earlier. When the pots are adjusted, they increase or decrease the gain of the amplifier. This voltage can also be adjusted with a DC power supply, so that the output level of the amplifier can be increased or decreased without affecting the sound quality.

TDA7350 is a great choice for applications that require a linear, low-noise, high-gain audio preamplifier. It can be used for a variety of applications, ranging from car audio systems to high-end studio recording. Its adjustable gain and tone control features make it a great choice for anyone wanting to customize their audio setup.

The specific data is subject to PDF, and the above content is for reference