TEN 20-2412

Current - Output (Max):	1.67A
Supplier Device Package:	--
Size / Dimension:	2.00" L x 1.00" W x 0.40" H (50.8mm x 25.4mm x 10.2mm)
Package / Case:	6-DIP Module
Mounting Type:	Through Hole
Efficiency:	89%
Operating Temperature:	-40°C ~ 85°C (With Derating)
Features:	SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	1.5kV
Power (Watts):	20W
Series:	TEN 20
Voltage - Output 4:	--
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	12V
Voltage - Input (Max):	36V
Voltage - Input (Min):	18V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

The TEN 20-2412 is a DC-DC converter that has the capacity to step-down high-voltage, low-current direct-current from one voltage to another. It is commonly used in applications where reliable power needs to be provided with varying input voltage. This device can be easily installed in environments where there is restricted space and can switch between sources of direct current with different voltages.

Applications

The TEN 20-2412 DC–DC Converter is most commonly used for supplying direct current (DC) power in places with unreliable power lines or limited space. It is commonly used for powering electronic applications, such as computers, electronic locks, lighting, and CCTV cameras. It is also suitable for batteries, since it can convert high voltage inputs into regulated outputs. This converter is widely used in transport vehicles due to its ability to convert so efficiently from one voltage to another.

Working Principle

The TEN 20-2412 DC–DC Converter uses a buck–boost topology, which has the ability to ensure an output voltage that is higher or lower than the input voltage. It is capable of converting DC inputs from 9V - 24V into a regulated output voltage from 0.4V - 20V. The output voltage can even be adjustable to suit certain applications.The converter is built with a PWM (Pulse Width Modulation) control circuit. This circuit allows the input voltage to be stepped down or stepped up as required. It works by taking the AC ripple off the DC voltage and using it to adjust the amplitude and frequency of the pulses. These pulses then control the output voltage, allowing it to be regulated.This converter uses switch-mode operation, in order to achieve high efficiency and effective operation. It has two pulley switches and a reactive load, which allow for smooth transitions between the input and output voltages. The transformation of the voltage is based on the ON and OFF of the switches, depending on the output power demand.

Conclusion

The TEN 20-2412 DC–DC Converter is a reliable and efficient device. It is suitable for applications where space is limited or where there is an unreliable power source. This device is suitable for a wide variety of applications, such as powering electronic equipment, batteries, and transport vehicles. It is capable of transforming direct-current from one voltage to another with the use of pulley switches and a reactive load. Its PWM control circuit ensures that an output voltage that is higher or lower than the input voltage can be obtained.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description