TEN 20-4823WIR

Current - Output (Max):	667mA, 667mA
Supplier Device Package:	--
Size / Dimension:	2.00" L x 1.00" W x 0.40" H (50.8mm x 25.4mm x 10.2mm)
Package / Case:	6-DIP Module
Mounting Type:	Through Hole
Efficiency:	89%
Operating Temperature:	-40°C ~ 85°C (With Derating)
Features:	Remote On/Off, OCP, OVP, SCP
Applications:	ITE (Commercial), Railway
Voltage - Isolation:	2.25kV
Power (Watts):	20W
Series:	TEN 20WIR
Voltage - Output 4:	--
Voltage - Output 3:	--
Voltage - Output 2:	-15V
Voltage - Output 1:	15V
Voltage - Input (Max):	75V
Voltage - Input (Min):	18V
Number of Outputs:	2
Type:	Isolated Module
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction of TEN 20-4823WIR DC DC Converters

DC DC converters are a crucial component of electronic circuits and systems. The TEN 20-4823WIR is one of the highly acclaimed designs with specific application fields and working principles. This article will take a look at the various aspects of this converter to explain how it works and its benefits.

Application Fields of TEN 20-4823WIR

The TEN 20-4823WIR DC/DC converter is designed for use in applications such as UPS systems, distributed power systems, medical diagnostic equipment, electronic instrumentations, telecommunication systems, computer networks, and renewable energy systems. The DC/DC converter is an efficient and reliable power source for these application fields.

Working Principle of TEN 20-4823WIR

The TEN 20-4823WIR DC/DC converter uses a switching control to convert the input voltage into a regulated output voltage. The input voltage is compared to a reference voltage, and if the input voltage is higher than the reference voltage, the converter will start to increase the duty cycle so that the switching device will start to turn on and off in a controlled manner. This results in a reduction of the output voltage. The duty cycle is then adjusted based on the input voltage and the reference voltage to maintain the output voltage at a predetermined level. The TEN 20-4823WIR DC/DC converter is a full-bridge architecture that operates in an input range of 20V to 48V. It has a maximum output voltage of 14V. It is also designed with a wide operating temperature range of -40°C to +85°C. The converter is also protected against short circuit and over load.

Benefits and Advantages of TEN 20-4823WIR

One of the major advantages of the TEN 20-4823WIR DC/DC converter is its high efficiency. The converter can reach up to 95% efficiency when operating under full load conditions. This makes it highly efficient in power conversion and reduces power wastage. The converter is also designed to handle surges of up to 10 times the rated power, so it can handle sudden power surges or voltage spikes without any issues. The converter is also compact and lightweight, making it ideal for use in applications where space is limited. In addition, the TEN 20-4823WIR DC/DC converter is designed with a built-in protection circuit that can help prevent it from being damaged due to over-temperature, over-voltage, short-circuit, and over-load. This makes it highly reliable and safe for use in many applications.

Conclusion

The TEN 20-4823WIR DC/DC converter is a highly efficient and reliable power source for many different applications. It has a wide operating temperature range, an input range of 20V to 48V, and a maximum output voltage of 14V. It is also designed with features such as built-in protection circuits and surge protection, making it highly reliable and safe for use. The converter is ideal for applications where space is limited due to its compact and lightweight design.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description