Allicdata Part #: | 751-1060-ND |
Manufacturer Part#: |
TESP5700 |
Price: | $ 0.00 |
Product Category: | Sensors, Transducers |
Manufacturer: | Vishay Semiconductor Opto Division |
Short Description: | PHOTODIODE PIN SIDE VIEW |
More Detail: | Photodiode 870nm 10ns 120° Radial, Side View |
DataSheet: | TESP5700 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Wavelength: | 870nm |
Color - Enhanced: | -- |
Spectral Range: | 790nm ~ 980nm |
Diode Type: | PIN |
Responsivity @ nm: | 0.37 A/W @ 950nm |
Response Time: | 10ns |
Voltage - DC Reverse (Vr) (Max): | 60V |
Current - Dark (Typ): | 1nA |
Active Area: | 2.2mm² |
Viewing Angle: | 120° |
Operating Temperature: | -40°C ~ 100°C |
Mounting Type: | Through Hole |
Package / Case: | Radial, Side View |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optical sensors are specialty detectors used in numerous applications. Photodiodes are one type of these sensors and are used to convert light intensity into electrical signals. The TESP5700 is a type of photodiode designed for high-efficiency detection of ultraviolet (UV) light. It is characterized by its packaging, which is designed to reduce noise and maximize signal stability, as well as its high sensitivity and fast response time.
The TESP5700 is designed primarily for UV applications, however it can be used for visible-light applications as well. It is designed for use in equipment that is subject to mechanical vibrations and is certified to operate with small-amplitude vibrations up to 20G. It has a standard active area of 1mm2 and can be ordered with special sizes up to 2mm2.
The TESP5700 has a wide operating-temperature range of -20 to +75 °C, so it can be used in a range of environmental conditions. It also has low reverse-bias leakage current, which is beneficial in applications where low-noise output is essential. It also has a very low dark current of typically 10 nA when measuring at a reverse bias voltage of -3V.
The main advantages of the TESP5700 are its fast response time and high voltage gain. The device is capable of detecting UV radiation in less than 8 minutes, making it suitable for use in applications that require quick response. The gain-voltage sensor offers high resolution and low noise, which makes it useful for applications such as fluorescent light measurement and medical diagnostics.
The working principle of the TESP5700 is based on the photoelectric effect, which states that when light is incident on the semiconductor material of the device, electrons will be freed. As the reverse bias voltage is applied, the electrons will then move through the diode, generating an output current. Depending on the intensity of the incident light, the output current of the device will vary.
The TESP5700 offers a range of uses in a variety of applications. It could be used in fluorescent light measurement, UV curing systems, solar imaging, medical diagnostics, and electronic security systems, as well as other applications where UV light needs to be detected and measured accurately. Moreover, its small size makes it easy to integrate into existing systems, while its low dark current and wide operating temperature range make it suitable for any environment.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
TESP5700 | Vishay Semic... | 0.0 $ | 1000 | PHOTODIODE PIN SIDE VIEWP... |
PHOTODIODE SILICON FLAT TO-46Photodiode ...
PHOTODIODE BLUE FIBER OPTIC STPhotodiode...
PHOTODIODE BLUE 2.03MM SQ TO-46Photodiod...
PHOTODIODE BLUE ENH 2.6X1.2 CERMPhotodio...
PHOTO DETECTOR 0.8MMPhotodiode
PHOTO DETECTOR 0.8MM TO-46Photodiode