TF6136HU-102Y20R0-01

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes are used in a wide range of applications, from industrial equipment to consumer electronics. The TF6136HU-102Y20R0-01 is a model of common mode choke, used for applications such as power factor correction (PFC), power line filtering, EMI suppression, and RFI suppression. This article will discuss the application field and working principle of the TF6136HU-102Y20R0-01.

The TF6136HU-102Y20R0-01 is heat resistant and capable of stripping frequencies up to 36KHZ, so it is suitable for applications with a higher electrical load, such as industrial machinery. It also reduces size, making it ideal for applications where space is an issue. The core can be incorporated into designs with a 2 to 4 turn ratio or a 5 to 10 turn ratio, so it can be used in many different types of applications.

The TF6136HU-102Y20R0-01 has a resistance of 20R0, making it a good choice for applications with higher current. The size is small enough to allow it to be used in a variety of conditions, such as in high-density PCBs or where there are tight restrictions on the size of components. The TF6136HU-102Y20R0-01 is also UL2732 approved, so it can be used in safety-critical applications. The choke has an operating temperature range of -40 to +85°C, so it is suitable for most environments.

Common mode chokes work by reducing the amount of electromagnetic interference that is generated by a system or component. The TF6136HU-102Y20R0-01 works by blocking high-frequency interference that can cause signal degradation or affect the performance of a system. The choke is made up of a ferrite core surrounded by wire windings, which act as an inductor. The inductor stores energy in a magnetic field when a current passes through it. This field can act as a filter, reducing the amount of high-frequency interference that is allowed to pass through the system.

The TF6136HU-102Y20R0-01 is capable of blocking frequencies up to 36KHZ. This makes it a good choice for high-intensity currents, allowing them to be filtered without the risk of any power loss or damage to components. The choke can also reduce power loss caused by resonance in the circuit, which can occur when two components have a natural frequency that is close to each other. This resonance can cause signal issues, such as noise or distortion, and can be effectively reduced by the use of a common mode choke.

In summary, the TF6136HU-102Y20R0-01 is a model of common mode choke that is suitable for a wide range of applications. It is designed to reduce the amount of high-frequency interference that is allowed to pass through a system, and it can also reduce certain types of power loss. The choke can be used in both small and large systems, and its UL2732 approval makes it suitable for safety-critical applications.

The specific data is subject to PDF, and the above content is for reference