TFL0816-1N2 Inductors, Coils, Chokes

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors, commonly known as chokes, are passive components used in electronic circuits to store energy in the form of magnetism. Since they can store energy in the form of a magnetic field, they are particularly useful for controlling or smoothing the flow of current. In some cases, they can provide a greater degree of precision control than resistors can. Since they contain no moving parts, their reliability and cost-effectiveness are high.

The TFL0816-1N2 is a common type of fixed inductor that is used in a number of different applications. The TFL0816-1N2 is a non-polarized coil with a inductance of 8.1 μH. It is designed to reduce EMI interference, and can be used in a variety of signal and power applications, from DC filtering to high frequency applications.

The TFL0816-1N2 chip inductor is a non-polarized fixed inductor which has two ends that are connected to a substrate. The substrate is composed of a base material such as epoxy resin or silicon in order to give the chip inductor both strength and flexibility. On the substrate, the wire winding forms a spiral around which there is a semicircular insulator. This insulator, known as the dielectric material, serves to reduce the capacitance of the inductor.

The working principle of the TFL0816-1N2 is based on Faraday’s Law of Magnetic Induction, which states that a changing magnetic field produces an induced electric field. This is the basis of operation for all fixed inductors. When an alternating current is applied to an inductor, the applied current will generate a magnetic field. This magnetic field will then induce an electric field, which will cause a voltage to appear at the terminals of the inductor. This voltage will oppose the applied current, and the amount of voltage induced depends on the inductance of the inductor.

The TFL0816-1N2 is generally used in applications where it is necessary to maintain a constant voltage or current in a circuit. For example, it is often used to create an impedance matching network in an electrical circuit. This is necessary in order to minimize power losses due to reflections. Similarly, the inductor can be used in power supply filters in order to reduce the amount of noise on a power line. It can also be used in RF and EMI filters in order to reduce the amount of electromagnetic interference emitted by electronic circuits. Additionally, the TFL0816-1N2 can be used as a part of a resonant circuit by utilizing its self-resonant frequency properties.

The specific data is subject to PDF, and the above content is for reference