THD 15-4823N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC Converters are an integral part of the electrical engineering world, as they are used to convert a DC (direct current) input to a DC output of different voltage. A DC-DC converter is a device that is used to take a DC input and convert it into a different, regulated DC output voltage within the same polarity. THD 15-4823N is a DC-DC converter that is widely used in several applications, and this article will discuss its application field and working principle.

The THD 15-4823N DC-DC converter is an isolated high voltage DC-DC converter, primarily used in applications that require digital fieldbus communication. It has a maximum output power of 15W and offers input voltage ranging from 18 to 72VDC. It can take a wide input voltage range, making it suitable for use in applications where the input voltage may vary widely. It is also integrated with several protection features, such as over current protection, over temperature protection, output over-voltage protection and input under-voltage lockout. The THD 15-4823N is designed for wide temperature ranged applications and has a wide operating temperature range from -40°C to +85°C.

In order to understand the working of the THD 15-4823N DC-DC converter, one needs to understand the basic working principle of DC-DC converters. A DC-DC converter works by transforming electric potentials from one voltage to another, usually between higher and lower voltage levels. A DC-DC converter takes the input DC voltage and converts it to a high frequency AC signal using high frequency electronics. This AC signal is then fed into a transformer that lowers the voltage according to the electrical energy equation. Finally, the AC signal is rectified to create a DC output voltage that is similar to the input voltage.

In the case of the THD 15-4823N, it uses a switched mode power supply (SMPS) circuit, as the switching frequency of the power supply is quite high, allowing it to convert a wide range input voltage to its rated output. This SMPS circuit has four main components: the input capacitor, the high frequency transformer, the rectifier and the output filter. The input capacitor is responsible for providing sufficient current and voltage to the DC-DC converter, and the size of the capacitor is typically determined depending on the maximum input voltage and output current of the DC-DC converter. The high frequency transformer converts the input DC voltage to the desired output voltage level, and the rectifier component converts the high frequency AC signal to DC voltage. Finally, the output filter is used to ensure that the output DC voltage is stable and does not have any noise.

The THD 15-4823N DC-DC converter is used in a variety of applications, such as mobile phones, tablet PCs, portable medical equipment, LED display and lighting, and DC motor drives. It is also used for Battery Management Systems (BMS), Power Control Systems (PCS) and Electric Vehicle Charging Systems (EVCS). In all these applications, the THD 15-4823N DC-DC converter offers great flexibility and convenience in terms of power supply, boosting output voltage or current regulation.

The THD 15-4823N DC-DC converter is a highly efficient device that offers reliable power quality, making it suitable for a variety of applications. Its wide input voltage range, high power conversion efficiency, wide operating temperature range, and several protection features make it one of the most preferred DC-DC converters among digital fieldbus communication applications.

The specific data is subject to PDF, and the above content is for reference