TIL113M-V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are protection and isolation devices which are used for communication and control systems that require electrical isolation between two circuits. A common example of an optocoupler is the TIL113M-V, a photovoltaic output transistor based optoisolator.

The TIL113M-V is a 4-pin optocoupler package designed with both a LED light source and a phototransistor output. The device is designed to achieve a voltage withstand of 10kV/s and a transmission speed of 1000 kHz. The LED light source is a Gallium Arsenide Infrared Emitting Diode (GaAiP) which allows it to switch on and off quickly and operate in a wide range of temperatures. The phototransistor used for the output is typically a photovoltaic output transistor (PVT) made of silicon. The PVT output is triggered by the light source which is produced by the LED.

The main principle of operation of the TIL113M-V, is that the LED light source is used to trigger the phototransistor which provides an electrical signal that is isolated from the input. When the LED is switched on, photons from the LED will be absorbed by the PVT, causing an increase in conductivity in the current loop. As the LED switches off, the photovoltaic response is no longer sustained and the thing resets itself. This allows the TIL113M-V to act as an electrical isolation barrier between two systems while providing an output that corresponds to the input.

The TIL113M-V is most commonly used in industrial and automotive applications to isolate signals and provide electrical isolation for control systems, power supplies, and high-speed communication systems. It can be used as an interface between logic systems and complex process control systems. In addition, it can also be used as a high-speed switch with low noise and high switching frequencies of up to 1000 kHz. The TIL113M-V is also highly reliable and has a long operational lifetime. It can operate in a wide temperature range (-40 ºC to 100 ºC) and offers protection from over-voltage, electrostatic discharge, and transients.

In summary, the TIL113M-V is an optoisolator device designed to provide electrical isolation between circuits. It uses a LED light source to trigger a photovoltaic output transistor which provides an output signal that is isolated from the input. The device is commonly used in industrial and automotive applications where high-speed switching, electrical isolation, and high reliability are required. The long lifetime, operation temperature range, and wide speed range make it an ideal solution for many applications.

The specific data is subject to PDF, and the above content is for reference