TIOL111DMWR Integrated Circuits (ICs)

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

1. Describe

The TIOL111DMWR family of transceivers implements IO-Link interface for industrial bidirectional, point-to-point communication. When connecting the device Connection to the IO-Link master via a three-wire interface, The master can initiate communication and exchanges data with remote nodes, while TIOL111DMWR behaves as a complete physical layer for communication. These devices can withstand up to 1.2 IEC 61000-4-5 Surge and Characteristics for kV (500 Ω) Integrated reverse polarity protection. A simple pin-programmable interface allows easy Connect to the controller circuit. output Current limit can be configured using external Resistor. Fault reporting and internal protection functions Provides undervoltage, overcurrent and over temperature conditions.

2. Feature

    1. 7V to 36V supply voltage

    2. PNP, NPN or IO-Link configurable outputs

        – IEC 61131-9 COM1, COM2 and COM3 data Rate support

    3. Low residual voltage of 1.75 V at 250 mA

    4. 50mA to 350mA Configurable Current Limit

    5. Withstands ±65V transients < 100µs

    6. Reverse polarity protection up to 60 V on L+, CQ and L-

    7. Integrated EMC protection on L+ and CQ

        – ±16 kV IEC 61000-4-2 ESD contact discharge

        – ±4 kV IEC 61000-4-4 electrical fast transients

        – ±1.2 kV/500 Ω IEC 61000-4-5 surge

    8. Fast demagnetization of inductive loads up to 1.5 hours

    9. Large capacitive load drive capability

  10. < 2µA CQ leakage current

  11. < 1.5mA quiescent supply current

  12. Integrated LDO option up to 20 mA

        – TIOL111: no LDO

        – TIOL1113: 3.3V LDO

        – TIOL1115: 5V LDO

  13. Overheat warning and thermal protection

  14. Remote wake-up indicator

  15. Fault indicator

  16. Extended ambient temperature: –40°C to 125°C

  17. 2.5mm x 3mm 10-pin VSON package

3. Application

    1. IO-Link sensors and actuators

    2. Factory automation

    3. Process automation

4. Pin configuration

5. Pin Description

6. Application Information

When TIOL111DMWR is connected to an IO-Link master through a three-wire interface , the master can initiate communication and exchange data with a remote node with the TIOL111DMWR IO-Link transceiver acting as a complete physical layer for the communication.