Allicdata Part #: | TJ-KY-PC-ND |
Manufacturer Part#: |
TJ-KY-PC |
Price: | $ 3.73 |
Product Category: | Uncategorized |
Manufacturer: | Hirose Electric Co Ltd |
Short Description: | INCORRECT INSERTION PREVENTION K |
More Detail: | N/A |
DataSheet: | TJ-KY-PC Datasheet/PDF |
Quantity: | 1000 |
50 +: | $ 3.38940 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
TJ-KY-PC is an abbreviation for Transparent Junction-Kirchhoff-Porter-Compound. In electrical engineering, TJ-KY-PC is a fundamental engineering principle that is applied to most electric circuits to minimize the amount of resistance encountered by the carrier signal as it passes through the components of the circuit.
The primary goal of TJ-KY-PC is to reduce the amount of power lost as the signal travels through the system. The theory states that in order for an electric circuit to maximize the efficiency of the system, the circuits must make use of as few junctions (or contacts) as possible. By minimizing the number of junctions in a circuit, the resistance that is encountered by the signal is reduced. The reduction in resistance also leads to a reduction in the power consumption of the circuit, since fewer junctions have to be crossed over by the signal.
The application of TJ-KY-PC is usually used in integrated circuit chips, high speed signal lines, and other components that need to be able to manage very small signal voltages. TJ-KY-PC is also useful for reducing power consumption and shielding components from radio frequency interference (RFI). In order to achieve the desired level of efficiency, it is important to design the circuit with the help of a reliable calculation method.
The working principle of TJ-KY-PC is relatively simple. Basically, it suggests that the signal propagates in waves of a certain wavefront, and that the flow of the current should be parallel to the wavefront in order to minimize the resistance encountered by the signal. It also advocates that the junctions (or contacts) should be reduced to a minimum in order for the signal to flow freely. Finally, the junction density should be minimized to reduce the total number of junctions. By following these principles, TJ-KY-PC helps improve the efficiency of electrical circuits.
In conclusion, TJ-KY-PC is an important engineering principle that helps reduce the amount of resistance and power consumption encountered by electric circuits. It is based on the concept that the signal propagates in waves, and that junctions should be minimized in order to reduce the resistance of the circuit. It is also helpful in reducing the amount of interference caused by RFI, so that circuit components are better shielded from radio frequency noise. Lastly, the working principle of TJ-KY-PC makes it an important engineering principle for creating efficient electrical circuits.
The specific data is subject to PDF, and the above content is for reference
DIODE GENERAL PURPOSE TO220
CB 6C 6#16 SKT RECP
CA08COME36-3PB-44
CA-BAYONET
CB 6C 6#16S SKT PLUG
CAC 3C 3#16S SKT RECP LINE