TL-W3MB2-5 5M

Series:	--
Part Status:	Active
Sensor Type:	Inductive
Sensing Distance:	0.118" (3mm)
Output Type:	PNP-NC, 3-Wire
Response Frequency:	600Hz
Shielding:	Unshielded
Material - Body:	Plastic
Voltage - Supply:	10 V ~ 30 V
Termination Style:	Cable with Connector
Operating Temperature:	-25°C ~ 70°C
Ingress Protection:	IP67
Indicator:	LED
Package / Case:	Module

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Proximity Sensors: Introduction to TL-W3MB2-5 5M

Proximity sensors are electronic sensing devices used for detection of objects or people in proximity to the sensor itself. They are commonly used in automation systems for industrial applications, as well as in consumer electronics where the need for objects to be close to a device or other object to trigger an action is present. Proximity sensors are versatile and have varied applications, ranging from simple proximity detection to more complex and intricate applications.The TL-W3MB2-5 5M Proximity Sensor is a particular type of inductive sensor developed for use in industrial, medical, and consumer applications. The 5M basically consists of two parts: an electronic circuit, and a coil. The electronic circuit is composed of different parts, including a power supply, a control logic unit, a signal receiver/processor, and outputs for various functions, all of which are connected through a printed circuit board. The coil is composed of a ferromagnetic core, which acts as an antenna for the detection of objects. The TL-W3MB2-5 5M uses the inductive sensing principle, which is based on the principle of electromagnetic induction. This principle states that when an electrical current is passed through a coil of wire, an electromagnetic field will be generated around it. When a metallic object approaches the vicinity of the coil, it causes a disturbance in the field, resulting in a change of voltage in the coil. This detected change in voltage is then used by the control logic unit to determine if a target object is present in the proximity of the coil.This type of inductive sensing technology is particularly suited for industrial settings due to its durability and low power consumption. One of the main advantages of the TL-W3MB2-5 5M over other types of proximity sensors is its ability to detect metallic objects at a distance of up to 5 meters. This allows the sensor to be effectively utilized in industrial settings that may contain larger objects at farther distances, such as in assembly lines or storage areas. Additionally, the TL-W3MB2-5 5M is able to operate in a wide range of temperatures, making it suitable for a wide range of industries.The versatility of the TL-W3MB2-5 5M is enhanced by its wide range of different outputs and its customizable sensitivity settings. Depending on the specific application, the sensor can be set to detect objects from as close as 2cm, to as far as 5 meters away. Outputs can be configured as either analog or digital, depending on the type of equipment it needs to interface with, and the desired sensitivity can also be adjusted to suit the particular application.In conclusion, the TL-W3MB2-5 5M is an advanced type of inductive proximity sensor designed to be used in a variety of applications. Its ability to detect objects at up to 5 meters, combined with its high safety ratings and low power use, make it ideal for use in industrial, medical, and consumer applications. Additionally, its wide range of customizable outputs and settings make it versatile enough to be used in a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference