TL-W3MC1

Series:	--
Part Status:	Active
Sensor Type:	Inductive
Sensing Distance:	0.118" (3mm)
Output Type:	NPN-NO, 3-Wire
Response Frequency:	600Hz
Shielding:	Unshielded
Material - Body:	Plastic
Voltage - Supply:	10 V ~ 30 V
Termination Style:	Cable Leads
Operating Temperature:	-25°C ~ 70°C
Ingress Protection:	IP67
Indicator:	LED
Package / Case:	Module

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Proximity Sensors are devices which detect the presence of an object without necessarily touching it. They are used in a wide range of applications in automation, security, robotics, mechanics, communications and construction. The most common type of proximity sensor is the TL-W3MC1.

The TL-W3MC1 Proximity Sensor

The TL-W3MC1 is a non-contact proximity sensor which works on the principle of inductive sensing. The device consists of two parts; a central coil and a ferromagnetic sensing tip. The central coil contains a number of turns of conductive wire which are connected to a control unit which sends a pulse of electricity through the coil. This creates a magnetic field in the sensing tip which is responsive to the presence of a ferromagnetic object. When the object enters into the field, it is detected and the signal is sent to the control unit which then processes the signal and triggers a response.

Applications

The TL-W3MC1 Proximity Sensor is used in a variety of applications, including automation, security, robotics, mechanics, communications and construction. The most common applications are:

• Security - The sensor is used in security systems such as door locks, access gates and surveillance cameras to detect the presence of objects or people.
• Robotics - The sensor is used in robotics to sense the presence of objects such as walls, objects, and other robots.
• Mechanics - The sensor can be used to detect the presence of moving mechanical parts or tools, such as cars, conveyor belt systems, etc.
• Communication - The sensor can be used in communication systems, to detect signals from devices such as receivers, modems and satellite antennas.
• Construction - The sensor can be used to detect the presence of materials, such as concrete, steel and other metallic objects.

Advantages

The TL-W3MC1 Proximity Sensor has a number of advantages over other proximity sensors. These include:

• Non-contact design – Since the sensor does not require physical contact with the object, it is not vulnerable to dirt, dust, vibration and heat.
• High sensitivity – The sensor is able to detect objects with very small variations in their magnetic field, allowing it to detect small objects or objects moving at high speed.
• Simple installation – The sensor can be installed quickly and easily and requires minimal wiring.
• Low power consumption – The sensor consumes very little power and has a long lifespan.
• Wide operating temperature range – The sensor can be used in environments with extreme temperatures without any loss of performance.

Disadvantages

The primary disadvantage of the TL-W3MC1 Proximity Sensor is that it is only able to detect ferromagnetic objects. This means that it is not suitable for applications which require detection of non-magnetic objects. Additionally, the sensor is not suitable for detecting objects which are moving too rapidly, as they will not be detected by the sensor due to the limited response time of the device.

Conclusion

The TL-W3MC1 Proximity Sensor is a non-contact sensor which is used in a wide range of applications. Its main advantage is its high sensitivity and low power consumption, which make it ideal for applications where objects are moving at high speed. However, its main disadvantage is that it can only detect ferromagnetic objects, which limits its application in certain areas. Overall, it is a reliable and efficient proximity sensor which is suitable for a variety of applications.

The specific data is subject to PDF, and the above content is for reference