TL061ACP

Current - Input Bias:	30pA
Base Part Number:	TL061A
Supplier Device Package:	8-PDIP
Package / Case:	8-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	0°C ~ 70°C
Voltage - Supply, Single/Dual (±):	7 V ~ 36 V, ±3.5 V ~ 18 V
Current - Supply:	200µA
Voltage - Input Offset:	3mV
Series:	--
Gain Bandwidth Product:	1MHz
Slew Rate:	3.5 V/µs
Output Type:	--
Number of Circuits:	1
Amplifier Type:	J-FET
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TL061ACP is a monolithic, low power, single-supply operational amplifier designed specifically for use with large signal processing in instrumentation systems. It is a high-tech product with a wide range of applications in various industries. The TL061ACP is an integrated circuit that contains components, most notably an operational amplifier (op amp), which can be used in a variety of applications such as signal conditioning, signal amplification, waveform generation, etc. It has a bandwidth of 15 MHz and can operate on supply voltages of 4 to 36 V and -2 to 36 V (for single supply operation), and +8 to 76 V and -4 to 76 V (for dual supply operation). It also has two inputs, 6 pin-out, high open-loop gain, low offset voltage, low offset current, low supply current, high input impedance and low input bias current. The TL061ACP offers the use a wide range of operating modes, including current-input and voltage-input, as well as bipolar and unipolar output configurations. It offers protection against static discharge and reverse supply protection. The TL061ACP has a wide range of applications including signal amplification, signal conditioning for signal intelligence processing, WCDMA, IDDMA and LPDMA applications. The working principle of the TL061ACP is based on the concept of an op amp. An op amp is an electronic device that has two inputs, typically labelled as non-inverting (V+) and inverting (V-), and one output. The op amp amplifies the voltage difference between the inputs and produces an output voltage proportional to that difference, known as the gain of the op amp. The TL061ACP has two different inputs- one for the non-inverting input and one for the inverting input. When a voltage is applied to the non-inverting input, it causes the positive input of the op amp to "rise" relative to the negative input. This causes the amplifier to output a voltage proportional to the difference in the inputs. The output of the op amp is given by the equation: Vout = AVin, where A is the gain of the op amp and Vin is the voltage difference between the two inputs.The TL061ACP is also featured with a low input bias current, low input offset current and high input impedance, which helps it to minimise any parasitic capacitance. These features make the TL061ACP an ideal choice for high-impedance, high-gain applications in audio, video, telecommunications and instrumentation circuits. In ultra-low-power applications, the TL061ACP can be used to shift voltage levels between supply pins with minimal power loss. Its high open-loop gain makes it a suitable amplifier for ultrasonic sensor applications. In instrumentation systems, the TL061ACP can be used to increase signals that are too weak for easy measurements. This helps to enhance the accuracy of the signals being measured, as well as increases their range and differences. The TL061ACP can also be used in feedback loops, such as those used in voltage regulation circuits. The device can be used to sense changes in the input voltage and respond by adjusting the output voltage. In addition to instrumentation systems, the TL061ACP can be used in a wide range of other applications. It can be used as an amplifier in audio, radio, and television systems, as well as in test and measurement equipment. It can also be used in power supplies, regulated power supplies, and as an active filter. The TL061ACP is an ideal component for many different applications, due to its high performance levels and wide range of features. Its wide bandwidth, high open-loop gain, low input offset, low input bias current and low supply current make it an ideal choice for a variety of applications. In instrumentation systems, its high performance levels make it an ideal component for amplifying weak signals. The TL061ACP is also highly suitable for use in feedback control loops, such as those used in voltage regulation applications. It is a versatile component that offers a wide range of benefits and is suitable for many different applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description