TL061CD Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TL061CD is an industry-standard JFET-input operational amplifier (commonly referred to as an op amp) used as a buffer amplifier in instrumentation and data acquisition designs. It has an exceptionally low input bias current, high open loop gain and low offset voltage. Many of these features make it ideal for complex buffer applications that require high accuracy or a low temperature drift.

TL061CD has a wide application field. It can be used in active filters, integrators and differentiators, DC measuring equipment, active sensing networks, audio preamplifiers and output amplifiers, and in oscilloscope and logic circuits. In addition, it is also suitable for use in analog-to-digital converters, voltage regulators, sample-and-hold circuits, and automatic gain control (AGC) circuits. On top of that, TL061CD is quite versatile and can be used in a wide range of analog circuits beyond its stated application field.

Working Principle of TL061CD

TL061CD is a three-terminal "buffer" operational amplifier. Its schematic symbol and pin out are shown in Figure 1. Its non-inverting input is the input terminal and its output is the amplifier\'s output terminal. Its inverting input terminal is connected to a variable resistor (R2) which acts as a voltage divider. To keep the circuits stable, a capacitive feedback network is also included in the circuit.

The operation of TL061CD is quite straightforward. When a signal is applied to its non-inverting input, the input signal is amplified by the overall gain of the amplifier (which typically includes the voltage divider, capacitive feedback network, and the amplifier itself). The output signal is the amplified version of the input signal. The amplifier’s gain (also referred to as the open loop gain) can be adjusted with the variable resistor, which sets the circuit’s closed loop gain. This allows the circuit to be tuned to provide the desired gain and frequency response.

The offset voltage of the amplifier is also adjustable by using the same variable resistor. This can be used to trim the amplifier’s input bias current and to provide a certain level of input offset voltage. The output impedance of TL061CD is also low, allowing it to drive heavy loads without much distortion.

Conclusion

TL061CD is a three-terminal "buffer" operational amplifier with a wide application field. It can be used in active filters, integrators and differentiators, DC measuring equipment, active sensing networks, audio preamplifiers and output amplifiers, and in oscilloscope and logic circuits. The operation of TL061CD is quite straightforward. The input signal is amplified by the overall gain of the amplifier and the output is the amplified version of the input signal. The amplifier’s gain, offset voltage, and output impedance can be adjusted with the variable resistor. All these features make TL061CD an ideal amplifier for buffer applications that require high accuracy or low temperature drift.

The specific data is subject to PDF, and the above content is for reference