TLC074IPWP

Series:	--
Packaging:	Tube
Part Status:	Active
Amplifier Type:	General Purpose
Number of Circuits:	4
Output Type:	--
Slew Rate:	19 V/µs
Gain Bandwidth Product:	10MHz
Current - Input Bias:	1.5pA
Voltage - Input Offset:	390µV
Current - Supply:	2.1mA
Current - Output / Channel:	57mA
Voltage - Supply, Single/Dual (±):	4.5 V ~ 16 V, ±2.25 V ~ 8 V
Operating Temperature:	-40°C ~ 125°C
Mounting Type:	Surface Mount
Package / Case:	20-PowerTSSOP (0.173", 4.40mm Width)
Supplier Device Package:	20-HTSSOP
Base Part Number:	TLC074

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The TLC074IPWP is an integrated circuit (IC) that combines a low-noise, wideband op-amp with two gain-controlled instrumentation amplifiers. This device is used to increase input signals from high frequency sources, such as power supplies and audio amplifiers, in order to improve performance and reduce noise. The TLC074IPWP is a versatile, low-cost device that can be used in a variety of applications, including communication systems, test and measurement equipment, and instrumentation.

Working Principle

The TLC074IPWP is a four-port device, with two inputs and two outputs. The two inputs are used to amplify the input signal, while the two outputs are used to adjust the level of the signals. The device amplifies the input signal through the use of two gain controlled instrumentation amplifiers. These amplifiers are controlled through an external resistor and capacitor network, allowing the user to adjust the gain levels of the amplifiers from 0 dB (unity gain) to ±100dB (±10V/V). The two output ports can be used to adjust the level of the amplified signal. The output level is set by an external resistor and capacitor network, allowing the user to adjust the output level from 0 dB to ±100dB (±10V/V).The TLC074IPWP also contains a low-noise, wideband op-amp. This op-amp is used to further amplify the signal, allowing more flexibility in the configuration of the device. The op-amp can be used to adjust the gain level from 0 dB to ±100dB (±1V/V). The gain of the op-amp can be adjusted manually or through the use of external components.

Application Fields

The TLC074IPWP can be used in a variety of application fields, including:1. Audio Amplifiers: The wide dynamic range of the TLC074IPWP can be used to improve the performance of audio amplifiers. It can also be used to reduce noise and distortion in audio amplifiers.2. Test and Measurement Equipment: The TLC074IPWP can be used to measure and monitor signals from power supplies and other high-frequency sources. It can also be used to make accurate measurements of signals over a wide dynamic range.3. Communication Systems: The device can be used to amplify signals from high-frequency sources, such as radio and television, in order to improve signal quality.4. Instrumentation: The TLC074IPWP can be used to measure signals in industrial and medical instrumentation, such as patient monitors and industrial control systems. It can be used to accurately monitor and measure signals in a range of frequency and power levels.

Conclusion

The TLC074IPWP is a versatile IC that combines two gain controlled instrumentation amplifiers with a low-noise, wideband op-amp. This device can be used in a variety of applications, including audio amplifiers, test and measurement equipment, communication systems, and instrumentation. The TLC074IPWP can be used to increase input signal levels from high-frequency sources, such as power supplies and audio amplifiers, in order to improve performance and reduce noise. The device can also be used to make accurate measurements of signals over a wide dynamic range, making it an ideal choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description