TLF14CB1021R5

Voltage Rating - AC:	250V
Package / Case:	Vertical, 4 PC Pin
Height (Max):	0.906" (23.00mm)
Size / Dimension:	0.866" L x 0.669" W (22.00mm x 17.00mm)
Mounting Type:	Through Hole
Features:	--
Approvals:	--
Ratings:	--
Operating Temperature:	-20°C ~ 105°C
Series:	TLF14
Voltage Rating - DC:	--
DC Resistance (DCR) (Max):	100 mOhm
Current Rating (Max):	1.5A
Number of Lines:	2
Filter Type:	Power Line
Part Status:	Obsolete
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode ChokesCommonly known as CM chokes, common mode chokes are used to suppress signal noise in applications such as filter interference, analog circuits, and other applications that handle a wide range of signals. Common mode chokes are constructed with discrete components such as coils, ferrites, capacitors, and other components. Common Mode Chokes, both in their physical construction and their electronic construction, act as inductors to reduce unwanted signal interference.The TLF14CB1021R5 Series Common Mode Chokes are designed to reduce electromagnetic interference in applications such as smart meters, communications & networking equipment such as xDSL, modems and Ethernet switches, automotive electronics, and medical electronics. These Common Mode Chokes are designed to reduce common-mode coupling from high-speed data lines and digital switching lines to the power-ground potential. They are rated up to 16 Amps, 125℃, and 10 MHz.The TLF14CB1021R5 Common Mode Chokes are constructed from air coils and ferrite cores, and they are designed to be used in high-frequency applications. The air coil is an active component, which is designed to reduce the common-mode noise, while the ferrite core helps to suppress the high-frequency component of the noise. The air coil is constructed from high-quality copper wire, and the ferrite core is designed to reduce the amount of inductance.The TLF14CB1021R5 Common Mode Chokes are constructed in an H-shaped core, where two coils are wound in different directions. This design helps to reduce the amount of induced voltage drop and cable losses in the system, as well as help to reduce the common-mode noise. The H-shaped core also helps to reduce the size of the choke, making it easier to install and more compact.The working principle of TLF14CB1021R5 Common Mode Chokes is pretty simple. By using an inductor, or choke, to create impedance in the signal path, the choke causes the unwanted signal interference to be absorbed rather than passed through in the circuit. The higher the impedance of the choke, the more noise it can absorb. The ferrite cores of the TLF14CB1021R5 Common Mode Chokes are rated up to 16 Amps, 125℃, and 10 MHz, allowing them to reduce common mode noise as efficiently as possible.The application field of TLF14CB1021R5 Common Mode Chokes includes smart meters, communications & networking equipment such as xDSL, modems and Ethernet switches, automotive electronics, and medical electronics. By using these chokes, unwanted signal interference can be reduced and the system can perform more efficiently. The TLF14CB1021R5 Series Common Mode Chokes can also be used in other applications such as filter-interference suppression, analog circuits, EMI/RFI filtering, and other high-speed data line applications.In conclusion, the TLF14CB1021R5 Series Common Mode Chokes are a reliable and efficient way to reduce common-mode interference in applications such as smart meters, communications & networking equipment, automotive electronics, and medical electronics. These chokes are constructed with air coils and ferrite cores, and they are rated up to 16 Amps, 125℃, and 10 MHz, making them the perfect solution for high-frequency applications. The working principle of Common Mode Chokes is simple, and they are designed to reduce signal noise and improve system performance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description