Allicdata Part #: | TLPN137(F)-ND |
Manufacturer Part#: |
TLPN137(F) |
Price: | $ 0.98 |
Product Category: | Isolators |
Manufacturer: | Toshiba Semiconductor and Storage |
Short Description: | HIGH SPEED LOGIC OUTPUT COUPLER |
More Detail: | Logic Output Optoisolator 10MBd Open Collector 500... |
DataSheet: | TLPN137(F) Datasheet/PDF |
Quantity: | 200 |
1 +: | $ 0.88830 |
10 +: | $ 0.72072 |
50 +: | $ 0.55440 |
100 +: | $ 0.49896 |
250 +: | $ 0.44352 |
500 +: | $ 0.37699 |
1000 +: | $ 0.31046 |
2500 +: | $ 0.29494 |
5000 +: | $ 0.28829 |
Data Rate: | 10MBd |
Supplier Device Package: | 8-DIP |
Package / Case: | 8-DIP (0.300", 7.62mm) |
Mounting Type: | Through Hole |
Operating Temperature: | -40°C ~ 85°C |
Voltage - Supply: | 4.5 V ~ 5.5 V |
Current - DC Forward (If) (Max): | 20mA |
Voltage - Forward (Vf) (Typ): | 1.55V |
Rise / Fall Time (Typ): | 3ns, 12ns |
Propagation Delay tpLH / tpHL (Max): | 75ns, 75ns |
Series: | -- |
Current - Output / Channel: | 50mA |
Output Type: | Open Collector |
Input Type: | DC |
Common Mode Transient Immunity (Min): | 10kV/µs |
Voltage - Isolation: | 5000Vrms |
Inputs - Side 1/Side 2: | 1/0 |
Number of Channels: | 1 |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optoisolators, also known as Optocouplers, are semiconductor devices that allow a current from one electrical circuit to control a current in another electrical circuit while providing electrical insulation between the two circuits. The TLPN137 (F) is an optoisolator that is commonly used in logic output applications. This device is used when a signal from one source must be isolated from the other wiring for safety reasons or when a signal must cross multiple grounds. The TLPN137 (F) is designed to provide reliable, optically-isolated digital outputs in many automotive, entertainment, and building automation applications.
The TLPN137 (F) is a GaAlAs LED-phototransistor optoisolator with an NPN phototransistor output. It has an LED forward current of 100mA, and an LED continuous forward current of 40mA. The phototransistor has a minimum collector-emitter voltage of 5V and a maximum collector-current of 100mA. It has a minimum dark current of 0.1uA and a maximum on/off current ratio of 300,000:1.
The TLPN137 (F) has a broad range of advantages, such as low power consumption, high isolation voltage, fast response time, and high reliability. Its built-in reverse blocking capability allows it to be used in load switch applications, while its wide operating temperature range from -55°C to +125°C allows it to be used in extreme environmental conditions. The TLPN137 (F) is also highly immune to noise and fluctuations in its input signal, providing reliable operation with minimal interference.
The TLPN137 (F) has a few major mechanical properties as well. It has a small form factor, making it suitable for use in tight spaces. It also provides good thermal capability, allowing for efficient heat dissipation. The TLPN137 (F) is available in a surface-mount package, which reduces installation costs and simplifies circuit board assembly.
The TLPN137 (F) is mainly used in digital logic output applications such as LED displays, transducers, sensors, and general-purpose logic. It is typically connected to the output of an interface circuit such as a microcontroller, analog-to-digital converter, or opto-coupler. The output signal is then read by the input of the microcontroller or analog-to-digital converter, which can then be used to control or be used in other applications.
The working principle behind the TLPN137 (F) is that it uses light to generate an output-level signal when it\'s exposed to an input. The input signal triggers the LED, which emits light. The light is then detected by the phototransistor, which activates the output stage. The output stage then generates a TTL-compatible logic signal that can be read by the microcontroller or other devices.
The TLPN137 (F) is a versatile and reliable optoisolator that is suitable for many logic output applications. Its small form factor and thermal capability make it well-suited for tight-space installations, while its fast response time and high noise immunity provide reliable operation even in extreme environments. It is a great choice for controlling LED displays, sensors, and transducers, and for providing digital isolations in a variety of applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
TLPN137(D4-TP1,F) | Toshiba Semi... | 0.34 $ | 1000 | HIGH SPEED LOGIC OUTPUT C... |
TLPN137(F) | Toshiba Semi... | 0.98 $ | 200 | HIGH SPEED LOGIC OUTPUT C... |
OPTOISO 5.3KV TRI-STATE 8SMDLogic Output...
OPTOISO 5KV PUSH PULL 6SSOLogic Output O...
OPTOISO 2.5KV OPEN COLL 8SSOPLogic Outpu...
OPTOISO 1.5KV OPN COLLECTOR 8DIPLogic Ou...
OPTOISO 3.75KV PUSH PULL 8DIP GWLogic Ou...
OPTOISO 7.5KV OPEN COLL 10DIPLogic Outpu...