TLV1012-15YDCR Integrated Circuits (ICs)

Series:	NanoStar™
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Type:	Class AB
Output Type:	1-Channel (Mono)
Max Output Power x Channels @ Load:	--
Voltage - Supply:	2 V ~ 5 V
Features:	Microphone
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C (TA)
Supplier Device Package:	4-DSBGA (1.12x1.12)
Package / Case:	4-XFBGA, DSBGA
Base Part Number:	TLV1012

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TLV1012-15YDCR Application Field and Working Principle

TLV1012-15YDCR is a linear amplifier device which can be used for audio applications. It can be used for various audio amplification events such as amplifying sound from home theater audio systems, amplifying sound from mobile devices, and amplifying sound from computing devices. The device\'s applications and working principle are described in more detail below.

Applications

TLV1012-15YDCR is a dual-channel, low power linear amplifier device that can be used for various applications. Its output impedance range is from 50Ω to 1KΩ and power supply voltage range is between +5V and +15V DC. It can be used with analog to digital converters as well as other devices, such as digital decoders, stereo receivers, and electronic amplifiers. It can also be used in applications such as consumer audio, automotive audio, video, gaming consoles, and digital audio processing devices.

Working Principle

TLV1012-15YDCR is built using an integrated circuit (IC) chip. This chip consists of two main components: an amplifier and a filter circuit. The amplifier is used to amplify small signals while the filter circuit is used to limit high frequencies. The IC chip has two pins, which are connected to the power supply and ground. The amplifier is triggered by a voltage applied to the power supply pin, which causes the current to flow through it. This current flow, in turn, triggers the operation of the amplifier and filter circuit. The amplifier circuit is used to amplify the input signal. The input signal is amplified by the number of stages within the amplifier. Each stage is capable of providing up to 15 dB of gain. The filter circuit is used to limit the maximum amount of frequency that can pass through the amplifier. It is set to the frequency of the input signal and acts as a high-pass filter. TLV1012-15YDCR has an open-loop bandwidth of 6 MHz, which allows it to handle frequencies up to 6MHz without any additional filtering. The device also has a gain-bandwidth product of 1 MHz, which means that at any frequency below 1 MHz, the gains will be lower than the bandwidths, leading to better signal-to-noise ratio. This is important in audio applications, as this helps ensure clean and accurate sound reproduction.

Conclusion

TLV1012-15YDCR is an integrated amplifier IC that can be used for a variety of audio applications. It has an output impedance range of 50Ω to 1KΩ and power supply voltage range of +5V to +15V DC. The amplifier and filter circuit integrated on the IC provide up to 15 dB of gain with a maximum frequency of 6 MHz and 1 MHz gain-bandwidth product. This makes it an ideal choice for many audio applications, such as home theaters, mobile devices, computing devices, and electronic amplifiers.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description