TLV2460CP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TLV2460CP is a low-power, wide supply range, dual channel CMOS operational amplifier. It is used for a variety of applications in the fields of instrumentation and in the fields of linear amplifying, operability, buffer amplifying and other types of analog circuits.

Introduction to TLV2460CP

TLV2460CP is a dual low-power, wide-supply range CMOS operational amplifier released by Texas Instruments. The TLV2460CP features per channel power between 1.2 mW and 10 mW, with a large common mode input voltage range of up to ±18.5V and a wideband gain-bandwidth product of 5MHz. It also features rail-to-rail output swing, low input offset voltage and low input bias current, making it an excellent choice for low-power, wide-bandwidth applications.

Applications

The TLV2460CP, due to its wide common mode input range, low power consumption, wideband gain-bandwidth product, rail-to-rail output swing and low input offset voltage, is especially well-suited for applications such as:

• Battery-powered systems
• Sample and hold circuits
• Signal conditioning amplifiers
• Active filters
• Pre-amplifiers
• Instrumentation and industrial systems

Working Principle

The TLV2460CP operational amplifier works by taking two input signals, one positive and one negative, and amplifying the difference between the two. This difference is calculated with the aid of the device\'s internal amplifier and can then be used as an output which is typically used to control something else.

The amplifier is internally constructed using two input terminals, a positive rail for the positive input and a negative rail for the negative input. It typically contains a feedback circuit connected between the output of the amplifier and one of the input terminals. This feedback loop helps maintain a high level of accuracy regardless of the two signals being compared at the inputs. The amount of gain (the ratio of the output to the input) is determined by the gain-bandwidth product of the device.

The output of the op-amp usually has a DC value close to ground (or any other voltage of choice) and then swings up and down depending on the signals at the input. This DC value is known as the "offset" and can be adjusted by adding a "trim pot" to the device, allowing you to make the output DC voltage closer to one of the input signals.

The TLV2460CP also features rail-to-rail output, meaning that it can deliver an output voltage that is close to the same voltage as the input. This allows the device to be used in applications where low-noise signals are important, such as audio amplifiers. It also allows for lower power consumption and better performance.

Conclusion

The TLV2460CP is an excellent choice for a wide range of instrumentation, linear amplifying, operability and buffer amplifying applications due to its low-power consumption, wide bandwidth, wide common mode input range, rail-to-rail output swing and low input offset voltage.

The specific data is subject to PDF, and the above content is for reference