TNGMFL1-1-78

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial connectors are integral components used in a wide variety of electronic applications including radio frequency (RF) communications, broadcasting and audio/visual (A/V) systems. Using a standard impedance such as 50 or 75 ohm, RF coaxial connectors provide a reliable means of passing signals through different mediums such as cables, wall jacks, amplifiers, or antennas. Commonly referred to as radio frequency or RF connectors, most coaxial connection perform the same basic function, however, the design, connectivity, and ratings of the connection can vary significantly from one application to another.

The TNGMFL1-1-78 coaxial connection is an example of a reliable, high-quality coaxial connection that is suitable for a variety of electronic applications. This compact connection is a single-ended, coaxial connector, and typically consists of a center conductor that is surrounded by a cylindrical insulator, then a dielectric material, then an outer metal braid which is mechanically connected to the metal connector. The connector surrounding the braid is usually referred to as the body or the shell. The TNGMFL1-1-78 is designed with a tapered diameter of 9.5mm and includes an integrated weatherproof enclosure for use in outdoor applications such as outdoor broadcast systems.

The TNGMFL1-1-78 connector is primarily used in the audio/visual industry and can be used to connect various electrical components including antennas, amplifiers, satellite dishes, and cables. To use this connector, simply push it into the corresponding port on the device, and it should lock into place, making it secure and providing a low signal loss connection. It is also suitable for quick disconnect/connect applications.

The TNGMFL1-1-78 coaxial connection operates and is rated for use with frequencies of up to 1000MHz. It is designed with a copper center conductor and a dielectric with an average loss of 3.0 dB. The connection is rated for a current capacity of 1.25 A DC/0.9A AC and VSWR match of1.5:1, with an impedance of 50Ohm +/-5%. This makes the connection suitable for use in high-performance audio/visual applications.

The TNGMFL1-1-78 is a high-quality coaxial connection that is suitable for a variety of audio/visual applications. It is designed with a tapered diameter and includes a weatherproof enclosure for outdoor use. The connection is rated for frequencies of up to 1000MHz, and has an average loss of 3.0 dB, a current capacity of 1.25A DC/0.9 A AC, and a VSWR match of 1.5:1 with an impedance of 50Ohm +/-5%. It is a reliable and secure connection that provides a low-signal loss connection for audio/visual applications.

The specific data is subject to PDF, and the above content is for reference