Allicdata Part #: | TNP10SC25R0FE-ND |
Manufacturer Part#: |
TNP10SC25R0FE |
Price: | $ 1.83 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES 25 OHM 10W 1% TO126 |
More Detail: | 25 Ohms ±1% 10W Through Hole Resistor TO-126-2 Moi... |
DataSheet: | TNP10SC25R0FE Datasheet/PDF |
Quantity: | 157 |
1 +: | $ 1.65600 |
10 +: | $ 1.47645 |
100 +: | $ 1.09265 |
1000 +: | $ 0.81563 |
Series: | TNP10 |
Packaging: | Tube |
Part Status: | Active |
Resistance: | 25 Ohms |
Tolerance: | ±1% |
Power (Watts): | 10W |
Composition: | Thin Film |
Features: | Moisture Resistant, Non-Inductive |
Temperature Coefficient: | ±50ppm/°C |
Operating Temperature: | -55°C ~ 155°C |
Package / Case: | TO-126-2 |
Supplier Device Package: | TO-126 |
Size / Dimension: | 0.335" L x 0.122" W (8.50mm x 3.10mm) |
Height - Seated (Max): | 0.598" (15.19mm) |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Resistors are electric components used for limiting levels of current or voltage in an electronic circuit. There are different ways of resisting current, and one of the most widely used methods is via through-hole resistors. A through-hole resistor is a component that has two metal pins that are attached to a resistor body. The body usually has two or more leads that can be attached to other electronic components in order to control the flow of current or voltage. The TNP10SC25R0FE is a through-hole resistor typically used in various electronic applications.The TNP10SC25R0FE is a cylindrically-shaped resistor with two wire leads, one on each end. The TNP10SC25R0FE is an ultra-precision resistor with tight tolerance values that are ideal for communications applications. It\'s an adjustable resistor, allowing for flexibility in tweaking its resistance value to calibrate or fine-tune the performance of the circuit. The resistor is offered in a variety of sizes, from 0402 to 2525, and comes with various resistance values ranging from 100 Ω to 4.7 MΩ, allowing users to select the right resistor for their needs.When used in an application, the TNP10SC25R0FE resistor will typically be soldered into the circuit board. One of its leads is soldered to the circuit board in order to create an electrical connection. The other lead is connected to either the power source, the output of the circuit, or another electronic component. This will vary depending on where in the circuit the resistor is located.The primary working principle of the TNP10SC25R0FE resistor is that it limits the flow of current in a circuit. This is done by introducing electrical resistance into the circuit. This resistance helps keep the current at the desired level and can also help protect other components from being damaged due to too much current. This working principle is the same regardless of the application in which the resistor is used.The TNP10SC25R0FE resistor is suitable for a wide variety of applications, including in automotive, industrial, communications, and military/aerospace industries. It is often used as a part of IR compensation circuits, for signal gain and level adjustment, or in high precision circuits where resistors with tight tolerances are needed. It can also be used to provide relays with device interruption control or as a terminating resistor to absorb the rest of the signal in a digital circuit.In conclusion, the TNP10SC25R0FE is a through-hole resistor that can be used in a variety of applications. It has two leads, one connected to the circuit board that the resistor is soldered onto and the other connected to either the power source, the output of the circuit, or another electronic component. It works by limiting the flow of current and helps prevent other components from being damaged due to too much current. The resistor can be used in automotive, industrial, communications, and military/aerospace applications and provides the user with an adjustable resistor with various resistance values to fit their needs.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
TNP160213F1W | ITT Cannon, ... | 0.0 $ | 1000 | CONN PLUG HSG FMALE 15POS... |
TNP10SC12R0FE | Ohmite | 1.83 $ | 245 | RES 12 OHM 10W 1% TO12612... |
TNP10SA1R50FE | Ohmite | 1.83 $ | 239 | RES 1.5 OHM 10W 1% TO1261... |
TNP10SC50R0FE | Ohmite | 1.83 $ | 167 | RES 50 OHM 10W 1% TO12650... |
TNP10SC25R0FE | Ohmite | 1.83 $ | 157 | RES 25 OHM 10W 1% TO12625... |
TNP10SC47R0FE | Ohmite | 1.83 $ | 150 | RES 47 OHM 10W 1% TO12647... |
TNP10SC200RFE | Ohmite | 1.83 $ | 147 | RES 200 OHM 10W 1% TO1262... |
TNP10SC15R0FE | Ohmite | 1.83 $ | 126 | RES 15 OHM 10W 1% TO12615... |
TNP10SC20R0FE | Ohmite | 1.83 $ | 120 | RES 20 OHM 10W 1% TO12620... |
TNP10SC1K00FE | Ohmite | 1.83 $ | 112 | RES 1K OHM 10W 1% TO1261 ... |
TNP10SHR330JE | Ohmite | 1.83 $ | 107 | RES 0.33 OHM 10W 5% TO126... |
TNP10SA1R00FE | Ohmite | 1.83 $ | 207 | RES 1 OHM 10W 1% TO1261 O... |
TNP10SC10R0FE | Ohmite | 1.83 $ | 204 | RES 10 OHM 10W 1% TO12610... |
TNP10SC100RFE | Ohmite | 1.83 $ | 120 | RES 100 OHM 10W 1% TO1261... |
TNP10SA3R00FE | Ohmite | 1.83 $ | 90 | RES 3 OHM 10W 1% TO1263 O... |
TNP10SHR250JE | Ohmite | 1.83 $ | 90 | RES 0.25 OHM 10W 5% TO126... |
TNP10SC560RFE | Ohmite | 1.83 $ | 78 | RES 560 OHM 10W 1% TO1265... |
TNP10SHR150JE | Ohmite | 1.83 $ | 65 | RES 0.15 OHM 10W 5% TO126... |
TNP10SA7R50FE | Ohmite | 1.83 $ | 63 | RES 7.5 OHM 10W 1% TO1267... |
TNP10SC27R0FE | Ohmite | 1.83 $ | 46 | RES 27 OHM 10W 1% TO12627... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...