TON 15-4810

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are important electronic components that transform one type of direct current (DC) power into another. They are used in a wide variety of applications, from small flexible power converters embedded in mobile devices to large industrial power supplies. The TON 15-4810 is a DC-DC converter that converts DC power from an input range of 5 to 48 volts into an isolated 15 volt output.

Overview of the TON 15-4810

The TON 15-4810 is a high efficiency, isolated, DC-DC converter designed for use in telecommunications applications. Its 600W output power provides ample capacity for a wide range of telecom applications such as powering High-Speed Digital Subscriber Line (DSL) modems, Internet Protocol (IP) phones, and other data communications equipment.

The TON 15-4810 comes in two formats – the TON 15-4810C and the TON 15-4810W. The TON 15-4810C is an industry-standard, open-frame module with the components mounted on top of a PCB. The TON 15-4810W is a fully potted module with components mounted inside a plastic enclosure.

The TON 15-4810 is designed to operate at an input voltage of 5 to 48 volts DC (VDC) and an output voltage of 15 volts DC (Vdc). It can accept an input current up to 30 amps (A) and supply an output current up to 60A. The converter has an efficiency of up to 96%, and its EMI has been certified to EN55022 Class B standards.

The TON 15-4810 has several protection features, such as Over-Voltage Protection (OVP), Over-Current Protection (OCP) and Short-Circuit Protection (SCP). It also has built-in temperature and current sensing capabilities to monitor, protect and control its operation.

Application and Working Principle

The TON 15-4810 is a DC-DC converter designed for telecom applications. Its output voltage can be adjusted between 5 and 48VDC depending on the application, while its high efficiency allows the device to transfer up to 600 Watts of power.

The TON 15-4810 works on the principle of conduction for converting the input voltage to the desired output voltage. The converter uses two switching transistors – a high-side switch and a low-side switch – mounted directly on the PCB of the converter. The transistors control the flow of current through the circuit, switching them rapidly to achieve an average output voltage.

The TON 15-4810 is an ideal power supply for telecom applications, as it is highly reliable and efficient. It offers several safety features to protect the system from any damage due to over-current, over-voltage, or short circuit conditions.

The TON 15-4810 is also capable of controlling, monitoring, and protecting its operation by having temperature and current sensing capabilities. This ensures that only the required amount of power is supplied to the system, thus increasing its energy efficiency.

Conclusion

The TON 15-4810 is a high-efficiency, isolated DC-DC converter designed for use in telecommunications applications. It is capable of converting an input voltage of 5 to 48VDC to an isolated 15VDC output with a maximum power output of 600W. Its efficient operation and built-in safety features make it an ideal choice for powering communications equipment.

The specific data is subject to PDF, and the above content is for reference