TPCM-2.4-5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes (also known as EMI filters or CM chokes) are extensively used as electromagnetic interference (EMI) filters for power and data lines. The most common type of CM chokes is a TPCM-2.4-5 type. This type of choke coil is typically round in shape with two concentric windings, an outer winding and an inner winding, connected in series. The outer winding is referred to as the drain winding, and the inner winding is known as the source winding. The two windings are typically isolated by a layer of insulator material. The drain winding has a larger diameter and is generally made of a much thicker gauge wire than the source winding; this is done to ensure that the source winding is not affected by variations in the environmental conditions.

TPCM-2.4-5 Common Mode Chokes are mainly used for EMI suppression and noise reduction. When this type of CM choke is connected to a power line, it helps prevent noise generated by the power line from being transmitted into other parts of the system. By providing a path for electromagnetic signals to travel in a different direction than the normal signal path, the CM chokes help suppress EMI and improve the overall system performance. This type of choke also helps with the prevention of ground loops, which can cause malfunctioning of electrical components, failure of equipment, and even data corruption.

The working principle of a TPCM-2.4-5 choke is very simple. When an ac signal is applied to the drain winding, the current flows through the choke winding. Since the current through the winding is not in balance, this causes an induced current in the winding which is in the same direction as the applied signal. Since the magnitude of this current is proportional to the rate of change of the applied signal, it is called an induced current. As the applied signal changes, so does the value of the induced current. This induced current helps reduce the amount of noise in the power line by providing a path for the noise to be dissipated.

The use of TPCM-2.4-5 Common Mode Chokes is becoming increasingly popular due to their high level of noise suppressing capabilities, their small form factor, and their relative low cost. These chokes can be used in a variety of applications, such as computer systems, industrial control systems, lighting systems, automotive and aerospace systems, and communication systems. Furthermore, since they are very easy to install, even inexperienced technicians can install them without any difficulty.

In conclusion, TPCM-2.4-5 Common Mode Chokes play a vital role in the suppression of electromagnetic interference and in the prevention of ground loops. These components are typically easy to install and are relatively low cost compared to other EMI filter components. With their increasing popularity, they are expected to become even more widely used in the future for a variety of applications.

The specific data is subject to PDF, and the above content is for reference