TPIC6A595DWR Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TPIC6A595DWR is a type of shift register typically used in logic - shift registers. It is part of the TPIC595 family of low-power, high-performance shift registers. These devices offer a number of features and benefits in terms of power saving, low noise, high performance and cost savings.The applications of the TPIC6A595DWR are quite vast. Its key applications can be found in various fields such as medical and safety equipment, communication systems, industrials, automotive and electrical/electronic products. This shift register can be used in bus-oriented architectures of design, such as ethernet, PC/104 and PMC systems. It is also used for switching and general logic applications.The main features of the TPIC6A595DWR include its low power consumption, high speed logic shifting, excellent noise immunity, and high reliability. It has an operating voltage range between 2.7 to 5.5V DC. The device also features a high peak output current up to 17mA, high output transistor drive strength up to 70mA, low ‘off-state’ output leakage current, and a built-in loss of Vcc (LOV) detector. Ideally suited for the most stringent applications, it is also extremely rugged and reliable. It works with an operating temperature range of – 40 °C to +85 °C and operates at frequencies of up to 20MHz.In terms of working principle, the TPIC6A595DWR is a serial-in/parallel-out shift register and is a basic type of logic device. This type of registers receives data bit by bit and stores it in successive stages. The shift register also has a single-pole, single-throw (SPST) switch that enables it to accept data from the data input (DIN). The SIN input is used to load the register. When the SIN pulse is asserted once, it shifts the data from DIN to the first stage. After the data is shifted, the shift register takes in data to the empty stage. This process continues until all the data is shifted and stored in the successive stages on the output side.The output of the TPIC6A595DWR can be configured in parallel or serial. The output from the register can be read in these two modes or modes of operation: parallel, where all the stages can be read simultaneously; or serial, where the output is read one bit at a time. The TPIC6A595DWR also has other common features, such as an asynchronous clear, a ‘toggle’, and an ‘enable’ input. The asynchronous clear input allows all the stages in the register to be cleared independently. The ‘toggle’ input enables all the output stages to change state simultaneously. And lastly, the ‘enable’ input enables the device to be enabled and disabled from one input. In short, the TPIC6A595DWR is a versatile and highly reliable shift register that is suitable for a wide range of logic - shift register applications. Due to its advantages in terms of performance, power, signal integrity and cost, it is becoming increasingly popular in the automotive, medical and safety equipment, communication and industrial electronics industries.

The specific data is subject to PDF, and the above content is for reference