TPS2012DG4

Voltage - Supply (Vcc/Vdd):	Not Required
Base Part Number:	TPS2012
Supplier Device Package:	8-SOIC
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Operating Temperature:	-40°C ~ 125°C (TJ)
Fault Protection:	Current Limiting (Fixed), Over Temperature
Features:	--
Input Type:	Non-Inverting
Rds On (Typ):	75 mOhm
Current - Output (Max):	1A
Series:	--
Voltage - Load:	2.7 V ~ 5.5 V
Interface:	On/Off
Output Type:	N-Channel
Output Configuration:	High Side
Ratio - Input:Output:	1:1
Number of Outputs:	1
Switch Type:	General Purpose
Part Status:	Not For New Designs
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to TPS2012DG4The TPS2012DG4 is a 4-channel power switching device, designed specifically for power distribution, load driving, and signal isolation applications. It features a low on-resistance of 0.4 Ohms and a wide operating voltage range from 3.3 to 27V. It is suitable for use in both AC and DC systems and offers high reliability performance.Application Field and Working PrincipleThe TPS2012DG4 is a high-efficiency power switching device widely used in AC power distribution systems to provide better voltage monitoring, improved current sensing accuracy, and enhanced reliability. It is capable of controlling four independent output channels with a maximum load current of 500mA per channel. In addition, it can also be used for load driving or for signal isolation applications.For load driving applications, the TPS2012DG4 can be used to control a variety of different loads with a high degree of accuracy and reliability. Each output channel can be individually set to a maximum current limit of 500 mA, and the output can be disabled through the internal logic with an enable / disable pin. This makes it easy to control the load and protect against overloads. For signal isolation applications, the TPS2012DG4 provides isolation between two electrical signals in the form of a low-resistance path. This provides a reliable way to transfer data or signals between two components without having to route the entire signal through a power supply or other power source. With a maximum isolation voltage of 1.5kV and a maximum input current of 30mA, the TPS2012DG4 can be used to isolate sensitive signals, as well as to control highly isolated and isolated loads.ConclusionThe TPS2012DG4 is an efficient and reliable power switching device, designed specifically for power distribution, load driving, and signal isolation applications. It is capable of controlling four independent output channels with a maximum load current of 500mA per channel, and offers high reliability performance. In addition, it can also be used for load driving or for signal isolation applications with a maximum isolation voltage of 1.5kV and a maximum input current of 30mA.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description