TPS2068D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TPS2068D is a high-side load switch compliant to the USB 2.0 specification and available in both SOT-23 and SC70 DPAK packages. It can be used for a variety of applications that require a high-side switch for MOSFET device voltage control. It is a low-cost, low-power, and low-drop-out integrated circuit (IC) ideal for microprocessor and battery management applications.

As power distribution switches, the TPS2068D switch can be integrated into systems that require protected power supplies, such as mobile phones, laptop computers, PDAs, and other devices. By isolating the power supply from the main regulated supply, the TPS2068D helps reduce the power consumption of the system and protect the system from any transient voltages or transients due to load changes. The TPS2068D is also suitable for use with circuit protection and power distribution designs because it can relay a signal between the device and the load, enabling the load switch to turn the power off in the event of an overcurrent or overvoltage situation.

The TPS2068D can also be used as a load driver. The TPS2068D implements two independent load switches, the first being a High voltage load switch (HVLS) which can be switched on or off. The second switch, called a Low voltage load switch (LVLS) is used for voltage control of lower voltage devices. Load switching capability enables the TPS2068D to switch on or off multiple loads slowly and systematically, allowing better system control and efficient power management.

In terms of its working principle, the TPS2068D employs a number of active components, including the P-channel MOSFET and N-channel MOSFET. The P-channel MOSFET is activated when the high voltage load switch is in on state, while the N-channel MOSFET is activated when the low voltage load switch is in on state. The two MOSFETs are controlled by the same bias input divided into two phases, one for the HVLS and one for the LVLS. When both MOSFETs are activated, the TPS2068D is able to provide current to the load.

The TPS2068D can also detect faults in the system. It has an integrated fault-protection feature that monitors the input voltage levels to detect any signs of overcurrent or overvoltage conditions. When such a fault is detected, the TPS2068D will either shut off the load switches or shut off both the P-channel MOSFET and the N-channel MOSFET. This ensures that the system is always protected from any potentially damaging conditions.

The TPS2068D integrates an automatic power-on-reset (POR) feature that enables the device to set the internal reference voltage and the load switches to their default state. Other features of the TPS2068D include a wide input voltage range, selectable minimum on-time and soft start delay, wide output drive capacity and adjustable over-voltage protection.

In summary, the TPS2068D is a versatile, high-efficiency and low cost integrated circuit for minimal power system design. It enables improved system performance by integrating a high-side load switch, a low-side load switch, fault detection and protection, automatic power-on-reset, and soft start delay. With its advanced features and wide input voltage range, the TPS2068D is suitable for a variety of applications ranging from mobile phones and laptop computers to portable electronics and battery management systems.

The specific data is subject to PDF, and the above content is for reference