TPS65136EVM-265

Series:	--
Part Status:	Active
Main Purpose:	DC/DC, Positive and Negative
Outputs and Type:	2, Non-Isolated
Voltage - Output:	4.6V, -5V
Current - Output:	80mA, 80mA
Voltage - Input:	2.3 V ~ 5.5 V
Regulator Topology:	Buck-Boost
Frequency - Switching:	--
Board Type:	Fully Populated
Supplied Contents:	Board(s)
Utilized IC / Part:	TPS65136

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TPS65136EVM-265 Evaluation Board physically demonstrates the multiple power supply solution capabilities of the TPS65136 ultra-low power buck, boost, inverting buck-boost and inverting buck DC/DC converters. The board is a compact size measuring 3 cm x 2.9 cm, with a 1 mm board thickness, optimized for ease of use and layered design during application development. Application Field:Due to its ultra-low power requirement, low power consumption and low output noise characteristics, the TPS65136EVM-265 Evaluation Board is commonly used to provide power supply solutions for IoT and IIoT applications. Its thermal performance is designed to yield a low thermal profile that fits within the space constraints of many consumer and portable electronics applications. In addition, the board also supports automotive applications, allowing for a greater efficiency and dynamic response for certain power requirements.Working Principle:The TPS65136EVM-265 Evaluation Board is powered by a single 3V – 5.5V DC input source. On the input side of the board there are two selectable modes; buck-boost or in-rush current limitation. If the buck-boost mode is selected, the board will automatically switch between buck and boost modes depending on the input voltage. On the output side, a single selectable pin configures the DC/DC converters as either a buck, boost, buck-boost, or inverting buck-boost. The onboard default regulators are set at an output voltage of 3.3V.The TPS65136EVM-265 Evaluation Board is a low-power system with an ultra-low noise profile. It is capable of operating with no-load conditions due to a low quiescent current draw, as well as a 4V UVLO feature that allows for reduced-power operation no matter the conditions. The board includes four logic pins; EN, SET, SEL1, SEL2, which provide a level of self-configuration for the board and open up additional possibilities for design modifications. The TPS65136EVM-265 Evaluation Board also features a {text-align:center}switchable mosfet to enable a variety of protection features, such as over-voltage and over-current protection, and a unique design to prevent shoot-through current. The board incorporates short-circuit protection and thermal protection features, as well as an alarm pin that can be used to activate an external device in the event of an over-current condition. Overall, the TPS65136EVM-265 Evaluation Board simplifies system development with its low power and low noise performance. It is a suitable power management solution for many IOT applications, and its advanced protection and self-configuring features make it ideal for a wide range of consumer and automotive products.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description