TPS71727DSER

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TPS71727DSER is a linear voltage regulator specifically designed for commercial, industrial and automotive applications that require low-noise, low-dropout and low-temperature drift performance. It provides an adjustable output voltage from 1.2V to 20V, and is capable of delivering up to 3A of output current in an ultra-compact 8-pin MSOP package.

This product family is an excellent solution for applications such as power management, hard drives, consumer electronics, industrial and automotive systems, where low-noise, low-dropout and low-temperature drift performance are critical features. This device features an adjustable voltage regulation point and a low operating current at light load, making it ideal for low-power, low-voltage applications such as point-of-load converters, battery backup systems and consumer electronics.

The TPS71727DSER is a 400mV dropout voltage regulator with a dropout voltage that is lower than most other linear regulators. It features fast transient response, low output noise and wide input voltage range. The device is designed to work in high temperatures. The maximum junction temperature is allowed to reach 130°C. The TPS71727DSER is capable of regulating line drops as low as 0.4V, providing output power to downstream circuits. It also features thermal shutdown, current limiting and reverse current protection.

The working principle of the TPS71727DSER can be described as follows: The incoming voltage is regulated to a desired level by controlling the base-emitter junction of an internal transistor, the regulator transistor. The output voltage of the device is set by a resistive divider connected between the output of the voltage regulator and ground. When the output voltage of the device deviates from the desired set-point, the regulator transistor will adjust the base current to the reference voltage, thereby causing a different transistor gain to be applied. This will alter the voltage at the output. The output voltage is then adjusted until the desired set-point is achieved. The specific data is subject to PDF, and the above content is for reference