TPS75233QPWPRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TPS75233QPWPRG4 is a low-dropout (LDO) linear voltage regulator from the family of Texas Instrument (TI) power management integrated circuits (PMIC). It belongs to the TI’s family of integrated voltage regulators, unique for its three integrated outputs – one for a positive voltage, one for a negative voltage, and one for low current (down to 0.6 mA).

TPS75233QPWPRG4 is a dual channel LDO regulator and regulated output voltage can be adjusted from 1.1V to 5.5V and ground with a tolerance of ±1.5%. It can supply up to 4A of current or, in buck mode, up to 8A of output current.

It offers a wide range of operating temperature (-40°C to 150°C) with operating region (up to 2 V) allowing the device to be operated at higher voltages, reducing the need of additional external components. Moreover, it comes with 2 full power rails (1.2V and 1.8V), and 2/3/4x current sharing on the main and buck channels.

TPS75233QPWPRG4 features an extremely low quiescent current (1.7 μA). It has a fast transient response time of 4 μs, and it suits a wide range of operating temperature (from -40 °C to 150 °C). Like the other TI voltage regulators, the TPS75233QPWPRG4 features a unique construction and is highly reliable.

The TPS75233QPWPRG4 has good external component requirements, with a low ripple rejection ratio (20 dB at 217 Hz). In addition, it provides a wide range of output voltages and current limits, allowing the use of the device in a wide range of applications. For example, it can be used in power management systems, embedded systems and instrumentation. The integrated output voltages and current limits also enable encryption and decryption in secure systems.

The main component of the TPS75233QPWPRG4 is the voltage regulator, which regulates the output voltage by means of an external resistor or other device. The regulated output voltage is adjusted through the external resistor, with a range of 0.2V to 5.5V, while the output current can be set from 0.6mA up to 4A. The device also offers an adjustable output voltage, which can be adjusted from 1.1V to 5.5V.

The efficiency of the TPS75233QPWPRG4 is further improved by the presence of a low-dropout (LDO) regulator, which has a low quiescent current and high power efficiency. This allows higher efficiency to be achieved without the need for additional heat sink or external components. The low-dropout regulator also helps to reduce noise generated by the TPS75233QPWPRG4.

Finally, the TPS75233QPWPRG4 comes with an integrated power controller, which can be used to control the system load and improve the overall power efficiency. This allows the device to be used in applications where power management is essential.

In conclusion, the TPS75233QPWPRG4 is a versatile LDO regulator with great features and capabilities that make it suitable for a wide range of applications. It offers a wide range of operating temperature and voltage, low quiescent current, high power efficiency and fast transient response time. The integrated output voltages and current limits, and the integrated power controller also make it an ideal solution for power management systems, embedded systems and instrumentation.

The specific data is subject to PDF, and the above content is for reference