TR2/C517S-3-R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuses

TR2/C517S-3-R is a type of fuse used widely in many industrial and commercial applications. Fuses are important safety devices that protect circuits from overloads or short circuits. The TR2/C517S-3-R fuse is a current limiting fuse, and is available in a variety of ratings. The fuse is designed for a variety of industrial and commercial applications such as lighting, HVAC, motor drives, pumps and compressors.

Working Principle of TR2/C517S-3-R Fuses

The TR2/C517S-3-R fuse works by interrupting the circuit when an excessive current flows through it. To work correctly, the fuse should be matched to the circuit it is being used to protect. The fuse works by melting the bridge wire inside, thus interrupting the circuit when the current exceeds the rated value. The fuse will also be overloaded if it is exposed to excessive heat or voltage.

Designing Fuses

Fuses are typically designed with a certain level of current that can flow through them without tripping. This is referred to as the “hold” or “threshold” current. Although the fuse may be rated for a certain current, it is important to understand the actual load on the circuit it is being used to protect. This is because the load may be higher than the fuse rating, and this can cause the fuse to trip and interrupt the circuit.

Special Considerations

When choosing a fuse, it is important to consider the type of circuit it is being used in. Different types of circuits require specific types of fuses. For example, a low voltage circuit should not use the same type of fuse as a high voltage circuit. Additionally, the fuse must be properly sized for the circuit it is being used to protect in order to ensure proper operation.

Uses of TR2/C517S-3-R

The TR2/C517S-3-R fuse is used in a variety of industrial and commercial applications. It is commonly used to protect lighting, HVAC, motor drives and pumps, compressors and other equipment. It is also commonly used for system protection, as it is designed to protect the system from overloads or short circuits that can cause damage to the equipment.

Conclusion

The TR2/C517S-3-R fuse is designed to protect circuits from overloads and short circuits. The fuse must be properly matched to the circuit it is being used to protect in order to work effectively. The fuse is designed for a variety of industrial and commercial applications, including lighting, HVAC, motor drives, pumps and compressors.

The specific data is subject to PDF, and the above content is for reference