TR50JBXR500

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are a type of resistors that use a solid cylinder or plate of a resistive material with a hole drilled through the center, providing access to the two contact points on either side. The contact points can then be soldered to the circuit board. The size of the resistor and the material determines the resistance, with smaller values commonly being represented by the letters TR and a four digit code, and larger values by the letters JBX and a three digit code. The TR50JBXR500 is a through hole resistor with a resistance of 500 Ohms.

When applied to a circuit board, a through hole resistor is used to limit the flow of current in a circuit, as the current must traverse the resistive material before being allowed to continue on. The resistance of the material largely defines how much current will be allowed to flow through the resistor, and thus the use of a resistor is to create a safe limit for the current in the circuit. This also allows for the voltage in the circuit to be manipulated and the power dissipation to be minimized. The TR50JBXR500 is used in this capacity, to create a safe flow of current while having a compact size.

The working principle of a through hole resistor is relatively simple and follows most resistors found in electronic circuits, having two contact points for the passage of current. The current is then limited by the resistive material in between the two contact points, with the amount of current allowed being determined by the resistance value of the material. This is where the TR50JBXR500 is advantageous, as its 500 Ohm resistance is well suited for a variety of applications. This allows for the resistor to be applied in circuits that need an appropriate voltage and current limit without taking up too much space on the circuit board.

The TR50JBXR500 is used in a variety of low voltage applications, such as low power audio systems, motor control systems, power supplies, AC circuits, and line level audio circuits. Additionally, this resistor is also commonly used in DC circuits such as amplifiers, digital circuits, and power systems. As this resistor has a 500 Ohm resistance, it can be used to create a voltage divider, allowing for controlled low voltage levels. It can also be used with a variety of sensors to limit the amount of current flow.

In summary, the TR50JBXR500 is a through hole resistor with a resistance of 500 Ohms. This type of resistor is used to limit the flow of current in a variety of applications, and is commonly used in low voltage systems such as audio and power circuits. Its compact size allows it to be used to create a voltage divider, and for use with sensors to ensure a safe level of current flow. This makes the TR50JBXR500 an ideal choice for a wide variety of electronic projects.

The specific data is subject to PDF, and the above content is for reference