Series:	--
Packaging:	Tube
Part Status:	Active
Type:	Transceiver
Protocol:	RS232
Number of Drivers/Receivers:	2/2
Duplex:	Full
Receiver Hysteresis:	300mV
Data Rate:	500kbps
Voltage - Supply:	3 V ~ 5.5 V
Operating Temperature:	0°C ~ 70°C
Mounting Type:	Surface Mount
Package / Case:	20-TSSOP (0.173", 4.40mm Width)
Supplier Device Package:	20-TSSOP
Base Part Number:	TRS3222E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The TRS3222ECPWG4 is an integrated circuit designed to drive, receive and transceive signals. This IC is designed to provide 4-channel high-speed differential signal path between 3.2 to 16V. The TRS3222ECPWG4 supports the multi-gigabit data rate up to 10Gbps and the maximum loop rate of 12 Mbps.

Application Field

The TRS3222ECPWG4 is widely used in consumer and enterprise applications, such as networking and communication, data storage, AV and consumer electronics. For consumer applications, the TRS3222ECPWG4 provides data rates up to 10 Gbps for consumer consumer computers, gaming systems, and NAS and DAS devices. It also supports ultra high speed applications like USB3.0, Thunderbolt, HDMI 2.1, DisplayPort 1.2, Ethernet, and Firewire. For enterprise applications, the TRS3222ECPWG4 is used in enterprises across the world. It can provide high speed and reliable data transfer for data centers, telecom and networking equipment. The TRS3222ECPWG4 enables high speed data transfer for HDMI, DisplayPort, Ethernet, USB 2.0 and FireWire.

Working Principle

The TRS3222ECPWG4 supports differential mode signaling, so that it can produce the good-quality data signals and ensure low noise immunity and high data integrity. The differential mode signaling allows the TRS3222ECPWG4 to reduce the total noise distortion, improve the signal-to-noise ratio, and increase the crosstalk immunity. The TRS3222ECPWG4 is designed to support four independent drivers and two differential channels. Each driver can be configured as either a 3.2V or 16V driving level by toggling the Drive Level Control pin. The TRS3222ECPWG4 also has power and ground pin for connecting the logic supply and ground. It features one Global Enable pin and four channel enable pins per channel, which can be used to enable or disable the drivers and receivers.In addition, the TRS3222ECPWG4 has an on-die termination (ODT) with integrated power and ground pins. This makes it possible to provide on-die termination to reduce overshoot and undershoot of signals.

Conclusion

The TRS3222ECPWG4 is an integrated circuit designed to drive, receive, and transceive 4-channel high-speed differential signals. It is designed to support the multi-gigabit data rates up to 10Gbps and the maximum loop rate of 12 Mbps. It is widely used in consumer and enterprise applications like networking and communication, data storage, AV and consumer electronics. The TRS3222ECPWG4 supports differential mode signaling and features power and ground pins, one Global Enable pin and four channel enable pins. It also has an on-die termination with integrated power and ground pins.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description