TS10P05G C2G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Bridge Rectifiers

Diodes bridge rectifiers are one of the most common and important electronic components used in electrical circuits. Used in a wide variety of applications, diodes bridge rectifiers provide a dependable and cost-effective way to rectify AC currents into DC currents. The TS10P05G C2G application field and working principle as a diode bridge rectifier is used to illustrate the general applications and operating principles.

Overview

The TS10P05G C2G is a bridge rectifier manufactured byTaiwan Semiconductor Corporation (TSC). It has a minimum blocking voltage of100V and a maximum non-repetitive surge current of900mA. The maximum forward voltage is 1.0V and the total capacitance is 5.0PF. The time-temperature dependence is 150ppm/°C.

Applications

The TS10P05G C2G bridge rectifier is typically used in power supplies, power converters, and charger circuits. A bridge rectifier is a type of diode rectifier which consists of four or more diodes arranged in a bridge circuit configuration. They are used to convert AC (alternating current) to DC (direct current). The TS10P05G C2G is ideal for these applications as it is capable of handling high current and voltage, and has a high surge current rating.

In addition to power supplies, bridge rectifiers are also used in radio frequency equipment, including oscillators, mixers, amplifiers, and receivers. Bridge rectifiers are also commonly used in automotive electronics, such as headlights, tail lights, indoor and outdoor lighting, and voltage regulators.

Working Principle

The working principle of a bridge rectifier is based on the fact that when a diode is connected in antiparallel with a voltage source, it will only allow current to flow in one direction. The bridge rectifier consists of four diodes arranged in a bridge configuration. This arrangement divides the alternating current into two halves and then causes one half of the alternating current to pass through two of the diodes and the other half of the alternating current to pass through the other two diodes.

This arrangement forces current to flow only in one direction and eliminates any alternating current in the circuit. The TS10P05G C2G bridge rectifier is a bridge connection of four diodes in which each diode has a maximum forward current rating of 900mA. This means that the bridge rectifier is capable of carrying currents up to 1080mA peak.

Advantages

The TS10P05G C2G bridge rectifier has a number of advantages over other types of rectifiers. First, the TS10P05G C2G has a higher forwarding voltage and surge current rating, meaning that it can handle higher currents and voltages. Additionally, the TS10P05G C2G is capable of handling higher temperatures and is less likely to suffer from thermal runaway due to its temperature dependence.

The bridge rectifier is also capable of providing a more regulated output voltage than other types of rectifiers, as it is able to eliminate most of the AC voltage that passes through the rectifier. This provides a more consistent output voltage and current than other types of rectifiers. Finally, the bridge rectifier is easier to assemble and less expensive than other types of rectifiers.

Conclusion

The TS10P05G C2G bridge rectifier is a reliable, cost-effective, and widely used diode rectifier. Its ability to handle high currents and voltages, its temperature dependence, and its ability to provide a more regulated output voltage make the TS10P05G C2G an ideal choice for a wide variety of applications. While other types of rectifiers are available, the TS10P05G C2G bridge rectifier is more cost-effective and capable of providing increased performance.

The specific data is subject to PDF, and the above content is for reference