TS1205-2R7M

DC Resistance (DCR):	4.8 mOhm Max
Height - Seated (Max):	0.220" (5.60mm)
Size / Dimension:	0.500" L x 0.500" W (12.70mm x 12.70mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Inductance Frequency - Test:	100kHz
Operating Temperature:	-25°C ~ 105°C
Ratings:	--
Frequency - Self Resonant:	--
Q @ Freq:	--
Series:	TS1205
Shielding:	Shielded
Current - Saturation:	10A
Current Rating:	14A
Tolerance:	±20%
Inductance:	2.7µH
Material - Core:	--
Type:	--
Part Status:	Obsolete
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors

TS1205-2R7M

Fixed inductors are components used in electronics for signal filtering, storage, and voltage-regulation, among many other purposes. The TS1205-2R7M is such an inductor, designed for storage rather than filtering applications. Like other fixed inductors, the TS1205-2R7M utilizes a coil of winded wire and a ferrite-core to achieve its electrical purpose.As an inductor, the TS1205-2R7M is composed primarily of a coil of winded wire wrapped around a ferrite core. This coil is connected to two terminals on either side, which allow electrical signals to be transmitted into and out of the inductor. When electrical current is transmitted through the inductor, the magnetic field that is generated as a result stores energy proportional to the amount of current passing through the inductor. This energy can be used for various applications, such as signal storage or voltage regulation.Due to its design and ability to store energy, the TS1205-2R7M is typically used in applications where storage rather than filtering is required. Examples of this include resonating circuits, power supplies, or any application where maintaining a consistent voltage is necessary. This type of inductor is also commonly used in audio and electronic circuits, where a dependable source of current softening is needed.As with any component, the TS1205-2R7M is affected by the surrounding environment. Heat can cause the ferrite core to degrade, and the current passing through the inductor can cause the resistance of the winded wire to decrease. Therefore, prior to installation, care should be taken to ensure that the inductor is kept in proper working condition.For anyone needing to install a TS1205-2R7M into their circuit, the installation procedure is relatively straightforward. Prior to installation, the ground terminal should be properly connected to the ground of the circuit. Then, the ground and hot terminals should be connected to the power source. Lastly, all of the terminals should be secured to ensure they are electrically connected to the circuit.As a storage device, the TS1205-2R7M is an invaluable component for any project requiring reliable power sources and signal storage. By properly installing and maintaining the inductor, it can be relied upon to power many different applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description