TS184F11CDT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

crystals are fascinating and complex materials that have extraordinary properties compared to most materials. One of the most important characteristics of crystals is their ability to oscillate at a specific frequency. This property makes them suitable for use in a range of applications such as timing, frequency control, and communications. The TS184F11CDT is one example of a crystal with these capabilities, and this paper will discuss its application field and working principle.

The TS184F11CDT is a type of quartz crystal resonator. It is a small device with two electrodes on each end and a quartz crystal in the center. The quartz crystal acts as a harmonic oscillator and vibrates when an alternating current is applied to it. This oscillation causes the frequency of the output signal to be very stable and accurate. The frequency of the output signal is determined by the thickness of the quartz layer and the size of the electrodes. The TS184F11CDT has a frequency of 11.059 MHz, making it well-suited for applications such as digital logic circuits, communications, and oscillators.

The TS184F11CDT is also suitable for oscillators and timing circuits. Oscillators are circuits that generate an alternating current signal of a fixed frequency, which then serves as a reference for other circuits. Timing circuits are used to measure time intervals. This can be done with a quartz crystal of known frequency, such as the TS184F11CDT. When an alternating current is applied to the crystal, it will vibrate at its resonant frequency. By counting the number of cycles in a given time, it is possible to measure the passage of time accurately.

The working principle of the TS184F11CDT is relatively simple. When an alternating current is applied to the two electrodes of the crystal, it causes the quartz crystal to vibrate at its resonant frequency of 11.059 MHz, which is determined by the thickness of the quartz layer and the size of the electrodes. This vibration creates a signal of the same frequency at the output of the device, which can then be used for timing, frequency control, and communications.

In summary, the TS184F11CDT is a type of quartz crystal resonator with a frequency of 11.059 MHz. It is well-suited for use in a number of applications such as digital logic circuits, oscillators, communications, and timing circuits. The working principle of the TS184F11CDT is relatively simple - an alternating current is applied to the two electrodes of the crystal, causing it to vibrate at its resonant frequency and producing a signal of the same frequency at the output of the device.

The specific data is subject to PDF, and the above content is for reference