TS25P07G C2G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are semiconductor devices used to allow electric current to flow in only one direction. Bridge Rectifiers are a specialized type of diode that can be used in many applications. The TS25P07G C2G is commonly known as a single-phase bridge rectifier diode. It can be used as a full bridge rectifier in circuits such as motor or light controls, or as a half-bridge rectifier in circuits such as ac/dc converters. Its maximum voltage and current are 25V and 7A respectively.

The TS25P07G C2G is comprised of four diodes connected in two sets of two. Each diode has an anode, cathode, and body. The anode is the positive side of the diode, while the cathode is the negative side. The body of the diode is the substrate on which the anode and cathode are joined. The junction between the two sides forms a “bridge,” hence the name bridge rectifier.

When applied to a circuit, the TS25P07G C2G bridge rectifier diode works according to the following principle: When an AC voltage is applied to the bridge rectifier, the two sets of diodes will alternate to produce a DC voltage output. The anodes of the two diodes in the first set will be connected to the anode of the first diode in the second set, and the cathode of the second diode in the first set will be connected to the cathode of the second diode in the second set. This alternating connection of the diodes allows current to flow through them in one direction only, resulting in a unidirectional output.

The TS25P07G C2G bridge rectifier diode can be used in a wide range of applications, including motor and light control circuits, ac/dc converters, rectifier circuits, and power supplies. In motor and light control circuits, the TS25P07G C2G bridge rectifier diode allows the motor or light to be switched on or off while keeping the polarity of the current the same. In ac/dc converters, the TS25P07G C2G bridge rectifier diode is used to convert alternating current to direct current for use in the circuit. In rectifier circuits, the TS25P07G C2G bridge rectifier diode is used to reduce the voltage ripple of the output waveform. Finally, in power supplies, the TS25P07G C2G bridge rectifier diode is used to rectify the ac input voltage and turn it into a dc voltage.

In summary, the TS25P07G C2G bridge rectifier diode is a semiconductor device used to allow electric current to flow in only one direction. Its maximum voltage and current are 25V and 7A respectively. The TS25P07G C2G bridge rectifier diode can be used in many applications, including motor and light control, ac/dc converters, rectifier circuits, and power supplies.

The specific data is subject to PDF, and the above content is for reference