TS40P07G D2G

Series:	--
Packaging:	Tube
Part Status:	Active
Diode Type:	Single Phase
Technology:	Standard
Voltage - Peak Reverse (Max):	1kV
Current - Average Rectified (Io):	40A
Voltage - Forward (Vf) (Max) @ If:	1.1V @ 20A
Current - Reverse Leakage @ Vr:	10µA @ 1000V
Operating Temperature:	-55°C ~ 150°C (TJ)
Mounting Type:	Through Hole
Package / Case:	4-SIP, TS-6P
Supplier Device Package:	TS-6P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to the TS40P07G D2G Bridge Rectifier

Bridge rectifiers are essential components in many electronic circuits as they allow AC current to be converted into DC current. The TS40P07G D2G bridge rectifier provides a reliable and cost-effective solution to this challenge. This article introduces the features and working principle of the TS40P07G D2G bridge rectifier.

Features of the TS40P07G D2G Bridge Rectifier

The TS40P07G D2G bridge rectifier has a four-terminal body that is mounted on a printed circuit board (PCB) using two screws. This diode has a 35 A current handling capacity and a VPK voltage rating of 800 V. The maximum surge current rating for the TS40P07G D2G bridge rectifier is 70 A. The component has a leakage current rating of 50 μA and a forward voltage drop of 2.0 V. The recovery time for the component is 95 ns and its power dissipation rating is 350 W.

Applications of the TS40P07G D2G Bridge Rectifier

The TS40P07G D2G bridge rectifier is widely used in power electronic applications such as solar systems, power conversion equipment and power supplies. This component is used as an efficient and reliable component for AC/DC conversion. It is also often used in high-current applications, such as motor control, as it capable of withstanding high electrical currents without failure. The TS40P07G D2G bridge rectifier can also be used for voltage doubling and polarity inversion due to its four-terminal body.

Working Principle of the TS40P07G D2G Bridge Rectifier

The TS40P07G D2G bridge rectifier works by using four semiconductor diodes connected together in a closed loop. This closed loop creates a one-way current path for electricity to travel. AC current is applied to the bridge causing it to alternate between forward and reverse bias modes, meaning that the current always flows in the same direction. As the AC current alternates, so do the forward and reverse bias modes of the bridge. This causes the current to always flow in the same direction, thus allowing the AC current to be converted into DC current.

Conclusion

The TS40P07G D2G bridge rectifier is a cost-effective, high-performance component that can be used in a variety of applications. The component is capable of handling high electrical currents and has a wide voltage rating. It is also able to convert AC current into DC current, making it a reliable and helpful component in many power electronic applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description