TS50P07G D2G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Bridge Rectifiers are quite common in a range of applications and are used to convert Alternating Current (AC) to Direct Current (DC). The TS50P07G D2G is a 3 phase bridge rectifier for 50A 200V applications.

Bridge Rectifier circuits are used whenever a DC current is needed from an AC source. The bridge rectifier converts the AC input into DC output. The bridge rectifier consists of two, two diode silicon rectifier bridges connected in series so that each output is the sum of two opposing half cycles of the AC input. This combination allows for efficient, low-cost operation and higher power levels than would be possible with a single rectifier.

When the AC signal applied to the three phase bridge rectifier, the current flows in opposite directions through each branch. This creates a pulsating DC output. The number of steps determines the change in peak-to-peak voltage. The TS50P07G D2G rectifier contains 6 diodes, 3 on each side, so the peak-to-peak voltage can be changed by the number of steps.

The application fields of the TS50P07G D2G bridge rectifier include power supplies, UPS systems, welding machines and various other applications requiring a steady current. The working principle is that the AC input is applied to the TS50P07G D2G bridge rectifier, pulses of current can flow in either direction through the three branches. This creates an output current which is the sum of the two opposing half-cycles of the input signal.

The TS50P07G D2G rectifier is a high-current half-wave rectifier for applications requiring scalability and greater compactness. It is engineered for higher reliability under extreme operating conditions. It features integrated reverse current blocking from the DC output voltage, an extended temperature range and holds a Dielectric strength of 2000V DC / 1000V AC between input terminals and case.

Overall, this bridge rectifier provides reliable rectangular waves in low to intermediate power applications such as power supplies, UPS systems, welding machines and more. The TS50P07G D2G is a suitable alternative for applications that require higher peak current with accurate regulation. Its unique design enables efficient conversion of AC power to DC power for a more efficient operation. And with its scalability and wide operating temperature range, it has the ability to withstand extreme operating conditions.

The specific data is subject to PDF, and the above content is for reference