TSL1112RA-6R8M4R6-PF

DC Resistance (DCR):	16 mOhm Max
Height - Seated (Max):	0.492" (12.50mm)
Size / Dimension:	0.441" Dia (11.20mm)
Supplier Device Package:	--
Package / Case:	Radial
Mounting Type:	Through Hole
Inductance Frequency - Test:	1kHz
Operating Temperature:	-20°C ~ 85°C
Ratings:	--
Frequency - Self Resonant:	18MHz
Q @ Freq:	10 @ 7.96MHz
Series:	TSL
Shielding:	Unshielded
Current - Saturation:	6.1A
Current Rating:	4.6A
Tolerance:	±20%
Inductance:	6.8µH
Material - Core:	--
Type:	--
Part Status:	Obsolete
Packaging:	Tape & Box (TB)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed InductorsFixed inductors are a type of electrical component designed to resist changes in electric current. They are used in various types of circuits to act as filter elements, in order to suppress frequencies outside of the acceptable range of operation. They operate by creating an inductive reactance, which opposes the change in voltage across the inductor. Fixed inductors are available in various configurations, each with different characteristics, and the type chosen depends on the application in which they are used.One such type of fixed inductor is the TSL1112RA-6R8M4R6-PF. This inductor is a non-shielded, surface mounted component with a small footprint and is capable of handling higher current and voltage ratings. It is composed of an encapsulated molded plastic body with gold-plated leads. The typical inductance of the TSL1112RA-6R8M4R6-PF is 6.8 µH at 100 kHz and 1.2 V, which increases to 2.4 mH at 1 MHz and 0.76 V. This inductor is rated for up to 1 A and voltage of 60 V.The primary application field for the TSL1112RA-6R8M4R6-PF fixed inductor is in switching power supplies and DC/DC converters. It is also used in combination with filtering elements such as capacitors and resistors in order to form LC filters to suppress frequencies outside the operational range. It is also suitable for use in high frequency applications, such as in RF filtering circuits.The working principle of a fixed inductor is based on the phenomenon of the self-induced emf. This is an inductive voltage caused by a changing current, which opposes the change in current by creating a back-emf opposing the current. As a result, this reduces the total current in the circuit, and in turn, results in inductance, which is measured in henries. The self-induced emf generated in a fixed inductor is proportional to the rate of change of the current through it. The amount of inductance in the circuit can be adjusted by altering the value of the inductor.Fixed inductors are used in a variety of electronic circuits and applications. They are suitable for use in power supplies, in combination with other components such as capacitors and resistors, and in RF filtering and high frequency applications. They are also used to limit noise and voltage spikes. The TSL1112RA-6R8M4R6-PF fixed inductor can be used in a variety of applications, and is ideally suited for use in power supply and noise suppression applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description