TSP 070-112

Current - Output (Max):	6A
Approvals:	CB, CE, cURus, SIQ
Minimum Load Required:	--
Size / Dimension:	4.33" L x 1.38" W x 4.33" H (110.0mm x 35.1mm x 110.0mm)
Mounting Type:	DIN Rail
Features:	Adjustable Output, IP20, Remote On/Off, Universal Input
Operating Temperature:	-25°C ~ 70°C (With Derating)
Efficiency:	87%
Applications:	Hazardous Locations, ITE (Commercial)
Power (Watts):	72W
Series:	TSP
Voltage - Output 4:	--
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	12V
Voltage - Input:	85 ~ 264 VAC
Number of Outputs:	1
Type:	Enclosed
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
AC DC Converters, or AC-DC converters, are devices that change alternating current to direct current. This type of conversion is essential for any device that runs on DC electricity, from a laptop computer to an amusement park ride. The TSP 070-112 is an AC-DC converter that converts input AC voltage to a lower DC voltage and current. This conversion is essential for running motors, lights, motors, or any device requiring a direct current.Working Principle
The TSP 070-112 converter works with an input AC voltage of 220 to 240 volts, and a voltage output of 24V. This converter uses a rectifier bridge in order to convert the AC input voltage to DC. The rectifier bridge contains four solid state diodes which are connected in a square arrangement to form the bridge. The diodes act as switches, allowing the current to flow in either a forward or reverse direction. The DC current that is produced by the bridge is then passed through a filter stage to smooth out the waveform of the current, and then to an output voltage regulation stage. The output stage is where the voltage and current is regulated to the desired level before being applied to the device being powered by the TSP 070-112.
Application Field
The TSP 070-112 can be used for a variety of applications that require a lower voltage and current DC power supply. Some possible applications include: amusement park rides, AC motors, lighting, automated gates, computer and electronic equipment, and many others. The benefit of using the TSP 070-112 for these applications is that it can provide a consistent and reliable source of DC voltage and current.Advantages of TSP 070-112
The TSP 070-112 converter has several advantages over other AC-DC converters. Firstly, it is relatively small and lightweight compared to other converters of similar power. This makes it easier to install and operate. Secondly, the TSP 070-112 has an overload protection circuit which protects the converter from any potential short-circuiting or overload situations. Finally, the TSP 070-112 has an auto-reset feature which allows the converter to reset itself after any overload or short-circuit situation. This ensures the safety of the device being powered by the converter.
Disadvantages of TSP 070-112
The main disadvantage of the TSP 070-112 is the cost. Although the price of the converter is relatively low, the cost of replacing components if the converter fails can be quite high. Additionally, the TSP 070-112 is not able to deliver high current loads, which means it is not suitable for powering heavy-duty motors or industrial machinery.Conclusion
The TSP 070-112 is a reliable, efficient, and compact AC-DC converter that can be used in a variety of applications. It is relatively inexpensive, has overload protection, and the auto-reset feature allows for a safer operation. However, due to its limited current capacity, the TSP 070-112 is not suitable for powering heavy-duty motors or industrial machinery.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description