TT170N18KOFHPSA1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors, or Silicon Controlled Rectifiers (SCRs), are power semiconductor devices with a three-terminal junction for the management of AC power. They are used to switch small amounts of current between a voltage source and a current load, allowing for the regulation of power in systems. This ability makes them useful in the world of electronics, from small appliances to large motor control systems. In particular, TT170N18KOFHPSA1 modules are high-power thyristor modules used for controlling motor speed in various types of industrial applications.

Generally, thyristors contain four layers of semiconductor material. Depending on the type of thyristor, those layers could be two-layer or three-layer devices. The term “thyristor” is a hybrid of the words “thyratron” and “transistor.” Thyristors can be compared to transistors, however they are bidirectional devices that allow current to flow in one direction only and are therefore considered more efficient when compared to regular transistors. They mimic the behavior of a mechanical contact switch, but with solid-state technology.

The TT170N18KOFHPSA1 modules are bidirectional devices used for controlling motor speed in various types of industrial applications. In essence, these modules are robust and reliable thyristor switches with an AC control input. Specifically, thee modules have an operating voltage range of 25 to 1500 volts and an on-state current rating of 16 amps up to 800 amps. Furthermore, they have a gate trigger current of 10 to 400 milliamperes and hold-on current of 30 to 2,000 milliamperes.

In terms of design, TT170N18KOFHPSA1 modules are designed with a semiconductor stack ‘package’ with two silicon-controlled rectifier (SCR) glass sheets connected in series for proper functioning of the control circuit. Each sheet has two electrodes in the form of a gate, which are used to control the device. The gate electrodes are connected to a current limiting resistor and a voltage source. The voltage source is controlled by the gate electrodes and its value determines the current flowing through the device.

In terms of applications, TT170N18KOFHPSA1 modules are intended for use in high-power industrial motor control systems. These systems typically require components that can handle large currents, such as these thyristor modules. The TT170N18KOFHPSA1 can be used to switch AC power on and off, allowing for the regulation of motor speed in both small and large motors. This is achieved by activating the gate trigger current which in turn allows current to flow through the device and eventually through the motor’s windings. By varying the current through the windings, the motor can be adjusted to run at different speeds.

In conclusion, TT170N18KOFHPSA1 modules are thyristor modules designed for high power AC motor control applications. These modules are designed with a package containing two SCR glass sheets connected in series with two gate electrodes connected to a voltage source. When a current flow is applied to the gate electrodes, the current will flow through the device and eventually through the motor’s windings, allowing for the regulation of motor speed. As such, TT170N18KOFHPSA1 modules are ideal for industrial systems that require precise power regulation.

The specific data is subject to PDF, and the above content is for reference